fenix Unisex's HM70R Rechargeable 21700 Powered Headlamp, Neutral White and Red LEDs

Product Information

Fenix Headlamps are top of the line LED headlamps. They work excellently for a variety of tasks like jogging, camping, and even mountaineering and caving. These headlamps are all LED and many are also USB rechargeable. Fenix Headlamps – Bright, Durable, LED Overall,this is a pretty lightweight headlamp. Without the headband, it’s an even more handy and lightweight flashlight, but even though it’s a good bit heavier than a 18650 size headlamp, all things considered, and keeping in mind the gross weight is with a 5000 mAh cell onboard, it’s not bad. Elektronika s digitální regulací, ochranou proti opačnému vložení baterií a ochranou proti přehřátí. The output specs scale nicely with Fenix’s figures, and this is what I’ve come to expect from them, and as usual, you can trust Fenix output specs. The flood LED scales a bit higher than the spot LED, and that’s typical of my sphere that favors floody lights over more throwy lights. 2500 Lumens from Turbo on the spot LED is very impressive! It’s the highest output I’ve seen in a headlamp so far and more than enough light for just about any task. Even after 10 minutes, maintaining almost 1000 Lumens is equally impressive. While our star rating provides a reliable indicator, we encourage you to read the full review to make an informed decision based on your own needs and preferences.

Blocare: Cu lanterna închisă, țineți apăsat pe comutator timp de 3 secunde, lanterna va clipi roșu de 3 ori pentru a indica statusul de blocare. În statusul de blocare, apăsând comutatorul va activa 3 clipiri de 1 secundă pentru a indica statusul de blocare. Lumens are measured in my 50 cm integrating sphere with a Digi-Sense 20250-00 data logging luxmeter. The sphere has been calibrated with a Convoy S2+ measured to 260 Lumens and the figures are within 10% of actual. I used the included ARB-L21-5000 21700 and tested Medium, High, and Turbo modes. Amps were measured with my Thsinde B18+ multimeter with 14 gauge wires directly in the meter, and FY19 clamp meter for current over 3 amps. Amp readings taken at 30 seconds. General ModeAs mentioned, the SST40 is cool white, and the XP-G2 is more neutral, and the Opple Lightmaster concurs, with the main LED coming in at 5648K and 62 CRI Ra, and the XP-G2 coming in at 4947K and 91 CIR Ra. Duv is0.0113 and 0.0002 respectively. As expected, the SST40 is a bit green/blue per the Duv, but it doesn’t look bad in person.

We are the home of Fenix lighting products in the United Kingdom, supplying a network of UK retailers, companies and individual customers from our base in Cardiff. The HM70R utilizes 3 LEDs: A main LED, a flood LED, and two red LEDs. Fenix is open about the LED make and model, so that’s nice, and here we have the Luminus SST40 for the main LED, the Cree XP-G2 HE handles the flood, and a pair of 2835 SMD LEDs handle the red light function. Even though it exists in the shadow of the SFT-40-W these days, the SST40 is still a good high output LED. It’s a 5050 size LED with a low vF, good efficiency, and can handle about 8 amps if direct-driven with good output (albeit a bit green). Uncover the anti-dust cap and plug the USB Type-C side of the charging cable into the charging port of the lamp. When in general mode each press will cycle through low, mid, high, turbo and when in functional mode each press will cycle through red, mid, high, red flash. Holding the button for 0.5 seconds will turn the light off and the last used setting will be remembered next time the light is turned on. Vypnutá čelovka se zapne do naposledy použitého režimu širokého reflektoru dvojitým rychlým stiskem tlačítka.

Last mode memory, but only in General Mode. The light will not remember Functional Mode if used last. Turbo is General Mode is not memorized (starts in High instead) Indikace stavu nabití baterie: Pokrátkém stisku tlačítka (čelovka musí být vypnutá) se aktivuje LED indikátor stavu nabití baterie v tlačítku. Zelené světlo značí, že baterie je nabitá na 85-100%, blikající zelené světlo na 50-85%, červené světlo 25-50%, blikající červené světlo méně než 25%.