Magnetizer and Demagnetizer for Screwdriver Bits and Tips, Powerful Rare-Earth Magnet Klein Tools MAG2

Product Information

The magnetizing current is measured and displayed. There is a potentiol free analog output to control the pulse shape.

The positioning of the object is crucial to ensure uniform magnetization. 3. Alignment of Magnetic Domains Once the magnetic domains are sufficiently aligned, the magnetic field is gradually reduced, and the object is removed from the magnetizer. By using the keyboard, you can input values such as charging voltage, limits of peak current monitoring, selection of output, and other parameters. Manual control of recharging, firing etc. also makes use of this keyboard. On the other hand, it is also possible to use a remote control and the device´s automatic control system. All relevant parameters are stored permanently inside the magnetizer, so that in case of power fail or after switching off the machine none of these data are lost. When switched on again, the magnetizer can continue operation without any need of new entries.

Recommendations

This process involves aligning the magnetic domains within a material, resulting in the creation of a magnetic field. The charging time depends on the total energy of the magnetizer and the charging power of the charging unit. It is determined as charging time = energy / charging power; typical times are between 1 and 30 seconds. This controlled increase ensures a smooth and effective magnetization process. 5. Finalizing the Magnetization a plastic, wood, Plexiglas, or any material you found, but NO metals like iron, steel, aluminum, copper or any metal that are atracted

When operating a magnetizer, it’s important to follow safety guidelines provided by the manufacturer. However, scientific consensus on the effectiveness of magnetized water is limited, and more research is needed. Can I Build a DIY Magnetizer? Oersted Technology offers an innovative line of magnetizers, magnetizing fixtures, and magnetic/electromagnetic equipment for use in manufacturing, research, and development applications. Specifically, we provide products for use in the production and testing of permanent magnets, motors, and electromagnetic systems. Through careful design and testing, Oersted Technology is able to provide you with magnetic/electromagnetic equipment that is both accurate and reliable.configuration based on sacred geometry’s master secret, the “Vesica Piscis”. We believe that the six powerful magnets combine with Our magnetizers are extremely versatile and use patented Electronic Capacitance Switching (ECS) technology, which allows the user to switch capacitance electronically.

The charging process is continuously controlled by the microprocessor system. During malfunction the power unit is separated from the line supply and will be discharged. The magnetizer has one standard high-current output. As an option, additional outputs are possible. Sine-shaped rise of the magnetic field with e-shaped decay. This type causes the least possible rate of change of the magnetic field and thus minimizes possible problems with eddy currents. The voltage at the capacitor banks is adjusted within the range of 200 to 5000 V with an accuracy of ± 1%. The necessary energy of the magnetizer is mainly determined by the required magnetizing field strength and the size of the workpiece. The modular design allows best adaptation to your requirements. This results in an optimal price/performance ratio. At the same time, subsequent adaptation to modified magnet products is also possible.Magnetizing water involves exposing it to a magnetic field, which is believed to alter its properties.