GODOX SK300II 300Ws GN58 5600K Studio Strobe Light Bowens Mount Monolight Flash with BD-04 Barn Door Color Filters Reflector Set

Product Information

Does flashes have different color reproduction than strobe? I dont know if I have right feel, but I feel that flashes has cooler colors tones... am I right? Optic S1 Secondary Unit Setting: In M manual flash mode, press button so that this flash can function as an optic S1 secondary flash with optic sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects. The device is equipped with memory function for the panel setting. It will help remember the panel setting 3 seconds after you set it. When starting up the flash next time, the panel setting will be the same as that before powering it off. Wireless Control Function The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. I have enough light to focus so am I right I wont need modeling light? And there wont be issue with mixed lights if Ill use higher shutter speed?

Godox SK300II-V Studio Flash Monolight (2-Light Kit) Godox SK300II-V Studio Flash Monolight (2-Light Kit)

Because it will be my first strobe Im not sure one thing... If Ill have only 4-stop range it means that I will be more limited / have to work more with camera settings or put strobe far away to get result I want? Select dial (14) decides different power output, satisfying light requirements in different environment. The power is adjustable freely from 1/16 to 1/1 which will be accordingly shown on the LCD display (10). "--" on the display indicates that the flash triggering function is turned off. Press the Test button to discharge power when the flash output is adjusted from high to low. Test Button When in NON OFF mode, long press the Button for 2 seconds to switch on the function that the modeling is off when triggering the flash. Now the LCD panel shows ( ). Long press the Button again to exit this mode. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector. The auto preflash functionality on the Godox sk400ii allows you to sync your lighting system to any camera that has a one preflash firing system natively included with their features. If your camera also supports the Xpro-N protocol then you can also use it as your sync and trigger the strobe light as required.

Although it is predominantly made from lightweight, high-quality metals, there are a number of plastic parts to the system but all plastic has been specifically treated to ensure it can withstand any high temperatures that it may have to deal with when being part of the Godox sk400ii. This is ideal as you may be using the lighting system with a 0.4 second recycle type and rapidly capturing photographs and activating the unit making it get hot in a short amount of time. To fire the flash without taking a picture, press the test button (4). It can also help adjust the flash brightness when combined with the select dial (14). Press the SET button and turn on the flash to view its version. Sync Triggering The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering. To control the flash wirelessly, you need a FT-16 remote control set (oncamera and on-flash). Insert its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera hot shoe. Settings made on the hotshoemounted transmit and receive ends will be wirelessly communicated to the flash. Then you can press the camera shutter release button to trigger the flash. You can also hold the transmit end at hand to control your off-camera flash.

Godox SK300II-V Studio Flash Kit | Photographic Lighting for Godox SK300II-V Studio Flash Kit | Photographic Lighting for

Flash diameter Φ12.7cm, height of flash with handle 20.6cm, length of flash with modeling lamp 29cm The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1, XT16 or FT-16 remote control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc. Use the power cord to connect the flash to an AC power source and turn on the power switch (3). Modeling Lamp I opted for the TT685's above the TT600's because a) they have TTL which maybe, just maybe I need from time to time and also, they can act as a master for the rest. Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling lamp and buzzer, as well as flash triggeringThe apparatus shall not be exposed to tripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. PrestaShop almacena datos en esta cookie para mantener abierta la sesión del usuario. Guarda datos como moneda, idioma, ID de cliente y otra información necesaria para el correcto funcionamiento de la tienda.