Joint It Simple Jointing Mortar Grey (1 x 20kg) - Large Size

Product Information

Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt. Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean annually to keep it looking new. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. How to use Joint-It Simple, watch the video below for assistance and follow the instructions below and on the outside of each tub:-

Joint-It Simple can be applied even when it’s raining or wet. Instead of waiting until the rainy months have passed to finish jointing a patio, use our paving grout to get the job done sooner. Every Joint-It product is formulated to deliver a professional quality result, whether that’s to joint, clean, seal or enhance the colour of your natural stone or concrete paving.Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Description Joint-It Simple 12.5KG Available In 4 Colours (select in the drop down menu) – new for this season! Final Cleaning: Clean the surface carefully with a fine hair broom so that all Joint-It residue is removed. Always sweep diagonally across joint. Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt.

Joint-It Dark Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Joint-It Simple – is a ready-mixed, permeable, jointing compound that can be applied in all weathers. All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean every 3 to 4 months to keep it looking new. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. Joint-It Simple is a ready-mixed paving jointing mortar solution. This jointing mortar is both water-permeable and cement-free. At Pave Direct, It is available in two colours, neutral and grey.Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes Simply the best – Ready to use paving jointing mortar, ideal for jointing paving slabs, cobbles and natural stone. Rain or shine Joint-It goes in fine.

Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles. Traditional polymeric sand or cement methods of jointing are extremely time consuming and laborious. Our simple to use, sweep-in grouting sand means gets the job finished faster and stands the test of time.Traditional sand and cement methods of pointing are extremely time consuming and laborious. This simple to use, sweep-in jointing grout gets the job finished faster and stands the test of time. Ready to use from the tub, no mixing, no second part to stir in, just open and use, simply brush in. Take care not to brush the product out of joints or into nearby drains. JOINT-IT will start to harden in joints within 90 minutes at over 20 C degrees. In lower temperatures JOINT-IT will take longer to harden. Once bag is opened, contents must be used within 4 hours. Follow-up with either our Supreme Colour Enhancer or Premium Sealer and you can be sure your patio or driveway is protected from the elements, and day-to-day spills, for 3-5 years. (Actual duration of product efficacy depends on local weather conditions).

Joints must be a minimum of 1/8 th” wide and 1” deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine. Developed by professional paving contractors for professional paving contractors and landscapers, our Specialist Hardscape Product Range delivers the exceptional results that our customers have come to expect. Price Equality Assurance: Whether online or offline, we strive to maintain pricing consistency, ensuring you receive the same value no matter how you prefer to shop with us. The overall cost will likely be very similar, regardless of the method you choose. Joint-It Simple– can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. 1. Prepare The Area Joints must be a minimum of 3mm wide and 25mm deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine.

Approximate coverage using 4 size random paving per 20kg tub is 10 -12 sq m, depending on joint width and depth or for more accurate calculation please use the handy joint IT calculator