Salt-Away Concentrate

Product Information

It is 100% non-hazardous and is a high-performance inhibitor which saves your equipment from rusting and corroding when Salt-Away is used on a regular basis. Rinsing off equipment with fresh water before or after the Salt-Away treatment is not necessary. Leaving Salt- Away on the equipment after the application will allow the solution to drizzle and drain into areas that stay wetter longer and where pooled salt is more likely to cause corrosion from the inside-out After the Salt-Away has had a chance to do its magic, I then spray the rods and reels down with a very fine mist spray. You can use a higher pressure spray if you want on the rod itself, but you want to be careful to not spray the reel with high pressure as you do not want to force any of the Salt-Away and saltwater solution into the interior of the reel where it will be hard to get out. The good news is that if it does get in there it shouldnot break down any of the lubricants according to the manufacturer. Consider factors such as the safety profile, especially if you have pets or children around, the lasting period of the protective coating the product provides, and how much solution is required for effective dilution. Your personal maintenance habits and frequency of exposure to salt are also vital factors. Final Verdict Here is what salt buildup looks like inside of an engine’s cooling system. It should be noted that this engine was flushed with fresh water after each trip in saltwater and there was still this much build-up.

When I apply the solution, I am careful to make sure that I cover the entire rod and I especially make sure that I soak the guides. I also spray the reel from all sides to make sure that it is evenly covered. After I have sprayed everything I let it sit for about 5 minutes to give the solution a chance to dissolvethe salt that has built up.

Salt-Away Boat Washing

The most recent advancement was made in 2014. Again, Salt-Away’s Mixing Unit was the recipient of the attention. Rather new in the marketplace, Eastman Tritan Copolyester Plastic was introduced into our manufacturing process to offer a significant upgrade in the material. This change resulted in a remarkable enhancement of increased strength, durability, and reliability. This new plastic material weighs more and its psi provides 400% improvement in strength Salt Away Benefits: There are no hydrocarbon solvents in the formula and the cleaning action is designed not to remove lubricating products. Salt Off with PTEF from Starbrite is designed to remove salt deposits from all surfaces. Such as metal, fiberglass, vinyl, rubber, glass, plastic, and painted surfaces swiftly and effectively. Although both salt removers have similar characteristics, they have some differentiating factors. For locations where no water source is available for water hoses. Examples: boat launch areas, sea-side tenant apartment windows and air conditioners, glass patio doors and patio furniture, industrial field work applications Choosing between these is a lot like choosing between a favorite lure; it boils down to personal preference. Starbrite’s Salt Off has some staying power; I’ll give it that. It’ll last you a bit longer than Salt Away.

See, both the salt removers are good. There are some factors where one comes on top of the other. Depending on the factors, it’s up to you to decide which one to use. When it comes to protective coating and effectiveness, the salt edges ahead. So, if you want a more effective salt remover, then you should opt for Salt-Away. Besides, Salt-Away is also safer to use. It causes fewer health hazards. Spray Salt-Away onto all the exterior surfaces of your equipment, vehicles, or other salt exposed items. Do not rinse. No need to scrub It is important to use appropriate equipment to remove salt. Following are recommended types of equipment to use to dispense Salt-Away If the pressure is not strong enough, the Salt-Away solution containing the dissolved salt, only drizzles down the surface, but does not exit. If this happens, the salt was not removed Connect garden hose to the handle of the Salt-Away Mixing Unit. Mixing Unit should be in ‘off’ positionDampen the surface to be treated with water do not flood, spray or pour Salt Away onto the affected area ensuring complete coverage. The most recent advancement was made in 2014. Again, Salt-Away’s Mixing Unit was the recipient of the attention. Rather new in the marketplace, Eastman Tritan Copolyester Plastic was introduced into our manufacturing process to offer a significant upgrade in the material. This change resulted in a remarkable enhancement of increased strength, durability, and reliability. This new plastic material weighs more and its psi provides 400% improvement in strength Evaluation of the efficacy of salt neutralizers for washing down snow and ice equipment Salt-Away is a non-toxic, biodegradable water-based solution. It has the ability to dissolve, release, and eradicate salts from any surface. With regular usage, Salt-Away will protect your boats, vehicles, motors, and equipment against salt corrosion.