Plum 4.5ft Children's Trampoline and Enclosure - Blue

Product Information

Once you have four trampoline springs added, we then add another four following the same steps as above but now on a different side. Like the image showed above. Each spring should be equally spread out and you should take not to put too much pressure on one side of the trampoline over the other. I hope it provides some good instructions on how to build a trampoline, remember to take the first steps seriously. Make sure you have the space in the garden for an outdoor trampoline and it’s free from any objects or obstacles. How to move a trampoline that’s already been built may require a different approach. Building some bigger trampolines is a task to be taken up by two people, as the springs you need to load take lots of tension. This is what makes the bounce better. The angled areas have only been available on trampolines for a few years, and it does feel like a bit of an evolution.

We have been a family run business since 1988, and play has always been our passion. Our goal is to inspire children to get outdoors and play in the fresh air.Our in house design team make products that are sustainable, durable and, of course, safe. We have small blue trampolines, pink and purple designs and even a Trolls Trampoline with six character sounds. There’s something for every kid! Make sure the T-Joints and the legs are screwed and secured correctly before moving onto the next stage of the trampoline build. Step 3 – Add The Trampoline Mat and Springs To the Trampoline. Over the past couple of years, trampolines for kids have become particularly popular as a welcome distraction to keep children active and let them burn plenty of energy in the garden.

Where to buy trampolines in the UK

Finally, you should look to put the trampoline ladder together, usually coming in a few separate parts you need to secure the ladder hooks and place on the trampoline. The ladder helps the little ones easily access and exit the trampoline. Next, you need to thread the trampoline steel rods through the top of the enclosure. There’s a hole that these rods go into easily. Once all three are through you then join the trampoline rods together with the aim of creating once large circular ring. I call this the trampoline halo. In-ground trampolines – trampolines that are set into the ground – are increasingly popular, both because they are more discreet (no eyesore in the garden) and safer (nothing to fall off). But you’ll have to dig a deep hole to fit it in and organise proper drainage to prevent rusting. Above-ground trampolines are easier to set up and maintain, but they entail more safety risks and can be a blot on the landscape. What shape should I buy? Screw the rods together using the joints shown above. They should easily screw and for a 6ft or 8ft trampoline, you should have 3 extended steel rods for larger trampolines you will have a larger amount of steel rods to build. This octagonal trampoline makes it easy to jump straight upwards, as opposed to round frames that bounce you towards the centre of the trampoline. It’s also got a patented crawl-through tunnel-style entry and exit system instead of the more traditional zip entry – a boon, as one of the biggest causes of trampoline injuries is zips being left undone. In fact, it’s been such a success that TP has rolled it out onto other designs.

Once you have the circular frame setup you need to start to add the legs. The legs join into the T-sections that we added to the frame earlier. Start with one dual leg and then move onto the next. You may need some help to add the legs onto the trampoline. In the end, you should have the trampoline frame setup like so. Connect and join the T-Sections to the trampoline frame parts. The purpose of the T-Sections is to provide a connection to the trampoline legs. For 6ft – 8ft trampolines you should expect 3 double legs with larger sizes such as the 10ft and 12ft trampoline using 4 and 5 legs respectively. If it going to be a daily routine and you can get kids to turn it into an outdoor play space, then spend a little more. Do try and gravitate towards a rectangular or oval one though as they take up less space. What is the law on trampolines in gardens?This keeps the trampoline mat taught and stops any damage occurring on one side of the trampoline mat as it’s perfectly balanced. You should just be mindful of neighbours, noise and any intrusion into their personal space over the fence that may occur. Where to buy trampolines in the UK If you’re confident you’ve got everything needed then it’s time to start the trampoline build. Step 2 – Start Building the Trampoline Frame. Step by Step. Now we have the trampoline structure set up it’s time to add the trampoline safety net. The purpose of a trampoline safety net is to stop any child from leaving the trampoline after a mid-direction bounce. So let’s build the safety net. The benefits are varied; there’s the smile it brings, as well as the fact you are outside, soaking up Vitamin D and not screen staring.

The next part is to join each frame piece together to form the perfect circle as shown above. This is the basis of the trampoline structure. It’s starting to take shape and you can now see where the trampoline mat and legs will be going. Make sure the frame is tightly connected together. The trampoline that this build guide is based on is the Kanga Trampoline 8ft. It will tell you how to put together an 8ft trampoline, However, you could apply these steps to a 6ft trampoline, 10ft trampolines, 12ft trampoline or 14 ft trampoline. It may differ in some steps but the main build will be similar. Always refer to your individual trampoline instructions first. Attach the first support pole to the trampoline fixture. Line it up correctly and secure the screw into the hole. Make sure it’s tight and feels secure. Kids from three to six years old can get bouncing on this compact trampoline, and the maximum user weight of 40kg means that it’ll be a while until they outgrow it and need a bigger model. The steel frame is strong and robust, and the 30 steel springs are covered in foam pads to keep them away from children’s prying fingers – and safe from the weather, too. Key specs – Sizes: 4 circular (8ft, 10ft, 12ft, 14ft); Frame: Galvanised steel; Netting included: Yes; Warranty: 2 years for frame, 1 year for fabric elements

Once you have the trampoline halo setup you attach the trampoline enclosure to the top of the trampoline. The Halo slots into the enclosure like shown above. You should note that the trampoline net at the bottom is not yet secured. Avoid securing this until after the trampoline net is attached to the top. Next, lay out all the trampoline enclosure poles and fixtures to ensure you have the correct parts ready. For smaller outdoor trampolines such as the 6ft garden trampoline or an 8ft garden trampoline then you are likely to have 3 support poles, for larger trampolines that would be expected to go up from 3-6 trampoline enclosure poles. Most of the poles will come delivered in parts and require assembly. How to choose the best trampoline for you (and your kids) Should I buy an in-ground or overground trampoline?