Easy Joint Paving Jointing Compound 12.5kg – Mushroom

Product Information

Sealing is particularly recommended for porous paving slabs and setts prior to laying and jointing with EASYJoint, to reduce the risk of staining or efflorescence. If sealer is applied after the patio has been laid, do not apply any type of sealer over the joint for at least a month after it has set hard. Only use a breathable sealer, otherwise EASY Joint may or may not remain permeable, and you may seal in any natural efflorescence passing through the stone. These natural salts will disperse over time. Can you apply EASYJoint in freezing conditions? In wet weather conditions, the curing process will be suspended. Prolonged periods of rain, or several intermittent showers will considerably extend the setting times. Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained). EASYJoint can be used with all paving types, but some need additional attention before and during the use of EASYJoint. In particular, please be aware of the information supplied elsewhere in this guide about sensitive natural stone types and paving with chamfered edges (‘V’ shaped joints). EASYJoint Colours Freezing weather will increase the set time and will cause the process to virtually stop, it can take many days for the joints to set fully hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way.

EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example. Utilise the same method when working with porcelain paving tiles as with working with stone or concrete. The base on which the porcelain is laid must be able to drain. If the base is non-permeable then EASYJoint Pro or EASYGrout should be used.Clean out the old jointing product completely to create the correct joint size (see information under the ‘Joints’ section). Do not use EASYJoint if the correct and fully clean joint size cannot be obtained. Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair.

Truly an all weather jointing compound: An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after applicationTechnically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. EASYJoint works 10-20 times faster than conventional mortar and it can be installed in rain or dry sunshine. When used with water, it offers a mark free paving solution and a solid join that will last for years to come. EASYJoint, as the name implies, prides itself on being a product that is easy to use. Please Note: This information is for guidance only, the above table is to be used as an estimate of the amount of EASYJoint required, we always recommend purchasing an additional 1-2 tubs to ensure that you have enough – it will also keep due to the unlimited shelf life.