Joined in 2023 
82 
63 About this deal
First off installation is a little a trouble with this due to the additional connections that the little screen needs. For some this may end up being a dealbreaker because of the fact that it might not fit in some smaller sized type factor builds or even a Mid-tower ATX develop with all the RAM slots inhabited. Even though Z73 and X73 share so many characteristics, their cooling performance is another story entirely. At idle, the Z73 maintained a whole degree (11 degrees Celsius) lower compared with X73 at the same ambient temperature. A significant difference between their thermal performance can be seen more when both are subjected to a load. The Z73 recorded a whopping decrease to 42 degrees Celsius. If you are planning on the screen dealing with right side up, one more thing to be conscious of is that unlike what the handbook says there are only 2 viable setup directions. It’s real that there is a method to rotate the image through the NZXT CAM software application however if it isn’t installed in one of the previously mentioned orientations then regrettably it wont be able to turn it to the appropriate orientation which appears like an odd constraint but it is what it is. In general, this is a nice addition, but in my modest viewpoint, a little pricey for what it is and what it does compared to other choices out there. This AIO Cooler was incredibly simple to set up. This was the first PC I’ve built and I truly wanted to go for it with the RGB. I enjoyed that this cooler could support a custom-made GIF image and NEEDED it. It works really well at keeping my Ryzen 3900x cooled and looks excellent in my glass front case. I changed out the two fans that began the radiator with Corsair RGB fans so they matched the rest of my case. The 2 fan radiator variation fit perfectly in the NZXT H710i case I got. Total 10/10 extremely pleased with this item.
Kraken X3 Series Installation Video – NZXT Support Center Kraken X3 Series Installation Video – NZXT Support Center
Next action is to connect the fans to your motherboard. In my case I have the nzxt controller so I just linked the fans to the splitters linked to the controller. The other choice is to link the cable television provided to the motherboard and then connect the fans to the fan splitters. If you do this then I don’t believe you can manage the RGB lights as they require to go through the controller. Another noticeable difference between the two types of fans is the speed range, The original Aer P 120mm fans offer a range of 500-2000 RPM while the new Aer RGB 2 120mm units speed range is reduced to 500-1500 RPM. The new Aer RGB 120mm fan also features 2 more blades and a sharper blade angle compared with the Aer P, so it will be interesting to see how these changes of blade design and rotational speed affect thermal performance. A few essential tips when installing AIO coolers vertically, the radiator pipes must be on the bottom. if they’re on the top, you’re most likely to get some gurgling sounds from the pump as any trapped air bubbles might get drawn into the pipelines and create a gurgling sound. If you’re mounting the radiator to the top of the case, the position of the pipes does not matter, simply whatever works finest for your layout.
Displays on computer components seem to be a trend these days. Motherboards and computer cases, have it. And now, even AIO liquid coolers have it. If you’re trying to find the bets liquid CPU cooling system possible, NZXT is usually a great option. The NZXT Kraken X73 and NZXT Kraken Z73 are two examples of Kraken X and Z Series that provide better cooling and allows you to personalize and customize the look of your CPU cooler. We’ll help you choose which one you should get by comparing them here. We will compare NZXT Kraken X73 vs Z73 in depth and find all their differences as well as give an assessment of which liquid CPU cooler is a better and more logical choice.
NZXT Kraken X73 vs Z73 - Differences between CPU Coolers NZXT Kraken X73 vs Z73 - Differences between CPU Coolers
Let’s be sincere if you’re purchasing this or considering buying this then the factor for it is most likely because of the amazing little screen that this thing has, and I can guarantee you that one shining feature was more than worth it for me but it might not be for someone else, undoubtedly. I was surprised at how crisp and clear the screen is for how small it is, and while you can publish your own gifs, pictures or whatever there is a bit of a learning process in ensuring your selected gif fits the method you desire it to without a loss in quality or perhaps unforeseen cropping or sizing problems. There’s a growing variety of useful guides online to guide you in how to do this so it’s normally a non issue.I upgraded from a x63 to the Kraken x73 as I recently got a larger case (h710i). I installed the radiator and fans on top of my case to exhaust the air out. Alan S – Laramie, WY This AIO cooler is a stunning thing on the computer, efficiency (cooling sensible) is nothing out of this world, it carries out similar to any other 360mm AIO out there, the pump is silent but the fans have to start harder when a Ryzen 9 3950X heats up a bit. The only real advantage for this cooler over others is the very nice screen on the pump, likewise, the setup is quite easy. likewise, ensure you plug the 4 pin port from the pump to the “AIO” or “PUMP” fan adapter on your mobo. these connectors will run at 100% power enabling your software (NZXT Cam, in this case) to control the pump speed. if your mobo does not have those fan adapters, you can utilize any other fan connector such as “CHA” or “CPU”, but if you do this make certain you set that adapters power in bios to full power or disable any speed control for that particular connector. again, this will permit the pump to get full power from the mobo, and NZXT Cam will manage the pump speed. It cools much like any other. Naturally, the software application does not play great with others. Need to mount with hoses on pump at the bottom. Since the ram will obstruct if you are using all 4 slots. What sells it is really the pump head enjoyable with the screen. The fans are quiet, move a bunch of air throughout the radiator. Use the beta version of software application to manage the ram Stix on the mobo. About as far as playing nice with Asus board. Simulated the adapters for RGB daisy chained ideal beside each other. Put pump port on the fan op. Header one next to aio header. Mobo will not see a fan and won’t get pass bios which is a good function to have to avoid damage from heat. Plug usb 2.0 into mobo. Fans into pump wire and sata power. And it’s ready to go. HUE 2 Channel Output LED Qty.: Up to four LED strips – 10 LEDs per strip, Up to five Aer RGB fans, Up to six HUE 2 accessories
NZXT Kraken X73 RGB White All In One 360mm Intel/AMD - Scan NZXT Kraken X73 RGB White All In One 360mm Intel/AMD - Scan
Explaining all the details of these new NZXT Kraken X-3 RGB AIOs may be repetitive reading for those of you who caught our original review of the Kraken X-3 and Z-3 series earlier this year, if that applies to you then you might want to skip past this introduction as the only significant change with this new bunch of AIOs is the addition of RGB fans, and of course the inclusion of the 240mm Z53 which was missing from the original launch in July. Once whatever was connected I turned pc on to ensure everything was working then installed the CAM software. The software is intuitive and easy to utilize. The fan LED can by resolved separately however I simply opted for one color. There is likewise RGB lighting on the pump which can also be changed. The temps on idle are in between 30-33 degrees. Whilst gaming it’s generally 40-50 degrees however on certain CPU demanding games it does go higher. Tension testing on Aida 64 the temperatures were in between 65-70 degrees. Temperatures will vary depending on what CPU you have so my outcomes will likely be various to yours.
The NZXT Kraken X73 and Z73 have a very similar configuration. In fact, it is too similar that you can assume that both liquid coolers perform identically also. However, that is not the case. At idle with an ambient temperature of 22 degrees, the Kraken X73 performs a little worse and scored 12 degrees Celsius. When the processor is subjected to a load in the same ambient temperature, the X73 records 46 degrees Celsius in temperature. I switched out the 2 fans that came on the radiator with Corsair RGB fans so they matched the rest of my case. The first fan requires to be linked directly to your controller unless you currently have RGB fans then it’s just a case of daisy chaining them all together. The CAM software works great and have actually had no issues that everyone else is discussing. Took me no time at all to get it up and running.
NZXT Kraken X73 RGB All In One 360mm Intel/AMD CPU - Scan
Okay so the performance of this cpu cooler is good, however I was honestly expecting just a bit more cooling performance from this latest pump style however it fizzles by a non-insignificant amount. I previously utilized a Deepcool Castle EX which is also a 360mm radiator AIO and the distinction in not just temperature but also sound is definitely noticeable and is a bit disappointing for a AIO cooler at this cost point. Our main focus of this review is the new Kraken X73 RGB, as mentioned previously the only difference with these coolers compared to the originals is the new RGB fans. Gone are the Aer P 120mm units with interchangeable colour trims that came with the regular X-3 AIOs, and in are the new Aer RGB 2 fans with an opaque diffuser ring housing eight RGB LEDs. All of the pictures reveal to mount this with the tubes at the top. This causes air bubbles and kills the cooler causing the fans to run more difficult and temps to remain greater. If front mounting, televisions on the radiator must be at the bottom. Air rises to the top. After switching my temps are cooler and the fans stay quieter at medium loads. I have an H510 case, but the x63 does not precisely fit well. You need to really press it therein, however it will fit with a bit of elbow grease. Its simple to ingratiate televisions at the top, however your cooling/performance will suffer considerably. The last action is to link the cables from the pump. The breakaway cable television has 3 ends. One is connected to my PUMP header on my motherboard, the other to an extra SATA cable television coming from my PSU, and the other is just left hanging as I had to utilize for it. The second cable television connected to the pump is the usb one which is likewise linked to an extra USB header on your motherboard.
If you can't quite afford the Kraken Z73, the X73 is a worth runner-up for powerful PC builds.
Thermal performance is the most important part of any AIO liquid cooler and the main reason why you want to buy an AIO in the first place. Based on their cooling performance, the Kraken Z73 has the obvious edge over the X73. However, is it worth it for their price? Overall extremely delighted with this product, simple to install, decent temperatures and RGB fans offer the case a nice appearance. Allison C. – Rome, GA Source: Rich Edmonds / Windows Central (Image credit: Source: Rich Edmonds / Windows Central) Who it's for
Great Deal 
New Comment