kenable External SHIELDED CAT6 Outdoor Use COPPER Ethernet Cable FTP Reel 50m [50 metres]

Product Information

It has more stringent specifications for crosstalk and system noise compared to Cat 5e cable, which allows for better performance and less signal degradation over longer distances. In these new areas of installation, the environment in which the network cable is run has a large amount of EMI (Electro-Magnetic Interference).

For best results use with the 'Easy' crimp tool, it allows you to cut, strip and terminate a plug all in one. Manufactured with a moulded style boot which provides strain relief and prevents the cable becoming loose from the plug. Using our in-house cable assembly facility, we are able to manufacture virtually any type of Cat6 UTP RJ45 Patch Leads to your exact specification. Shielded feed-thru modular plug provides an internal and external ground connection for cable foil or drain wire. Shielding helps protect the data from any sort of electromagnetic interference from an outside source.Take a look at this blog for tips on dealing with issues: Basic Network Cable Troubleshooting: What Did I Do Wrong?

For those who would like to understand more about RJ45 plugs and why there can be such a great deal of confusion surrounding them, please read What is an RJ45 Connector? There is a lot of confusion and misinformation out there regarding the termination of shielded bulk Ethernet cable to shielded plugs. Just be sure to use the same sequence at both ends of the cable unless you want to create a cross-over cable. Our kenable Cat6 FTP outdoor cable is designed with FULL COPPER 23AWG twisted pairs and is Foil Shielded to ensure any interference is kept under control it also has a drain wire so can be earthed! Cat6 cable uses twisted pair cable as standard to minimise the amount of crosstalk to reduce the noise created by electrical interference.

This shielding usually comes in the form of a foil shield wrapped around the twisted pairs, which is in turn wrapped by a PVC or low smoke zero halogen (LSZH) sheath. This cable has been fitment and performance tested when using our Cat6/6A Shielded Pass Through Plug .

Carefully, while keeping the conductor color sequence correct, “choke” upward the conductors to remove about 0. Available in 1 way and 2 way ing singlegang and 4 way in Dualgang High gloss finish matches with all other faceplates in the CCS range Please note: these faceplates are supplied unloaded. If this is unavoidable, we would recommend using shielded FTP data cable like this one to minimise the risk.

Pre-Step: Bend the external ground crimp/strain relief collar downward from the default position of 45 degrees. Note: if you choose shielded cables, there's no mix-and-match; everything connected to a shielded cable must also be shielded and grounded (like couplers, jacks, or even network controllers). The fully shielded patch leads increase signal isolation and prevent contaminant noise from entering a cabling system. Ethernet crossover cable on the other hand is used for connecting two types of the same device together e.