Ronseal Smooth Finish Filler Hairline Crack 330g

Product Information

A pourable ultra low viscosity twin pack epoxy designed to penetrate well into the crack, curing far harder than the original concrete! Dry mixes require water, followed by hand mixing until they reach the desired consistency—which could be a combination of the manufacturer’s recommendations and how runny you need it to be. For very deep cracks you may need to use a deep crack filling compound to fill the bulk of the crack first and then apply a finish fill on top, this will depend on the product and it’s fill depth will be stated in the manufacturer’s instructions. Open the crack so it is about 15 – 50mm wide and around 30 – 75mm deep (depending on its size) unless of course the crack does not go down that deep! Toupret’s filler is suitable to use on a variety of substrates including, plasterboard, old painted surfaces, gypsum plaster, cement, concrete, cellular concrete, breeze blocks, bricks and stone.

This liquid concrete crack filler comes in a 1-quart bottle and works its way into small cracks (up to 0. For hairline cracks, choose a liquid concrete crack filler or thin caulk, which can flow easily into the crack and fill it. Its thick texture makes it suitable for holes or gouges that are fairly deep but can be a little trickier over shallow scratches.Red Devil adheres well, dries to a light concrete color, and won’t shrink or crack, resulting in a long-lasting fix. It is also resistant to water, salt water, oil, petrol, heat and cold and can be used to bond together different materials and seals leaks in Steel, Copper, Lead, Asbestos and Glass Fibre.

See our pages on repointing brickwork and blockwork walls, How to mix sand and cement mortar and how to match the colour of existing sand and cement mortar. We first consider how easy the filler is to use, whether it goes on smoothly and is easy to apply, as well as how well it covers up damage. Ultra-strong this liquid resin is easy to use and apply sealing fine cracks, small voids or small sections in concrete. Brewers Quick Drying filler is a ready-mixed paste that’s ready to sand and paint after just 15 minutes.Paste is undoubtedly the easier of the two, but a powder will last longer and won’t dry out like a paste eventually does. Once it has fully expanded, you can cut off the surplus, sand down and decorate or even render or plaster over. Gives a smooth finish which dries fast and can usually be over painted with emulsion based paint within minutes.