Dell U2415 UltraSharp 24 Inch WUXGA (1920x1200) 16:10 Monitor, 60Hz, IPS, 6ms, Ultrathin Bezel, 99% sRGB, 3x DisplayPort, 2x HDMI, 5x USB, Adjustable Stand (Height,Pivot,Swivel,Tilt), 3 Years Warranty

Product Information

here how uniform the brightness and colour temperature was across the screen, as well as identify any

The U2415 is slightly unusual in that it offers a 1920×1200 resolution. This can be thought of as essentially an HD screen but you get an extra 120 pixels in height meaning that this is a slightly squarer monitor compared to the usual 1920×1080 format. I’ve historically always had two screens, one wide and one square so this fitted in nicely with what I’m used to. And don’t underestimate those extra horizontal pixels, they do come in very useful. It is possible to chain together monitors with different display resolutions. For example, one 2560 x 1600 monitor could be used with two 1920 x 1080 monitors.The last monitor in the chain could even be an older DisplayPort 1.1 monitor (which only has a DisplayPort input), so long as the other monitors all have DP 1.2 inputs and outputs.NOTE: Maximum achievable resolution in Daisy Chain configuration may be impacted by computer support for HBR2/HBR3 specifications. More information about computer models supporting HBR3 can be found in the following article: Dell Systems Supporting HBR3 Specifications We explain the terms you need to know and round up the best G-Sync, 144Hz, 1440p monitors out there right now. colorimeter with a central point on the screen calibrated to 120 cd/m 2. Measurements for colour temperature (white point) were taken using Here they have factory calibrated the default 'Standard' preset mode to a 2.2 gamma, 6500k white point and with a

ICC profiles and gamma corrections. The screen was tested at default factory settings using the DVI interface, and analysed using Connect DisplayPort Out connection on the first monitor to DisplayPort In connection on the second monitor ( Figure 2). our response time measurement article for a full explanation of the testing methodology and reporteddE colour accuracy of <3 (the U2414H had dE <4 target). A copy of the calibration report from our unit isprovided below for reference: The reason for this is that the Intel HD Graphics driver requires a "terminator" signal in the chain to indicate the last monitor is the last monitor in the chain in which to extend (or duplicate) the desktop to. If there are three monitors in the daisy chain, then the first two monitors would have DP 1.2 enabled and the third would be disabled, and so on. Verify that the video or graphics card (GPU) on your personal computer supports DisplayPort 1.2 MST.

Select On Screen Display (OSD) the DP1.2 enable/disable feature. Set the first monitor to DP1.2 enabled, set the second monitor to DP1.2 enabled and set the third monitor to DP1.2 disabled (if the third monitor is the last monitor). The first display will be your primary display and the 2nd and 3rd displays will be extended.box the screen used 20.0W at the default 75% brightness setting. Once calibrated the screen reached Multi-Stream Transport (MST), also known as Daisy Chaining, is a new connection specification that allows multiple monitors to be connected in series with the video signal being passed from the computer to a monitor, and then from the first monitor on to the second monitor and so on.