Yuasa YBX3075 12V 60Ah 550A SMF Battery

Product Information

Yuasa are one of the world's largest manufacturers and suppliers of valve regulated lead-acid batteries with global manufacturing plants and an extensive marketing and distribution network throughout the UK and Europe. A. Boost charging is not recommended except in exceptional circumstances e.g. a stranded customer, as this will reduce battery life, especially if a battery is boost-charged more than once.

C. Only use a boost-charger that limits the charging voltage to a maximum of 14.2 Volts and that has a temperature monitor.These maintain a fixed, constant, pre-set voltage throughout the charging period. The current cannot be set and will fall as the battery state-of-charge increases. Modern cars often require more powerful batteries to power air conditioning stop/start systems sat navs in-car DVD players and phones. The following options are available in the Yuasa range. Yuasa YBX5075 Silver Series Battery When fitting the charger to the battery, connect the positive lead to the positive terminal and the negative lead to the negative terminal.

Note. Many customers severely underestimate the amount of time necessary to charge a flat battery. This results in customers returning batteries saying that they have charged the battery but that it is still not holding charge. D. Charge the battery for the number of hours shown in the table below depending on the open-circuit voltage. B. Stop charging when the battery is gassing freely and the battery-voltage shows no increase over a period of at least 2 hours. C. Note. The majority of constant potential chargers are incapable of charging a severely over discharged (below 11.00V) battery in a realistic period of time. A minimum of 24 hours is normal. It might be impossible to charge an over discharged battery. Modified Constant Potential ChargersSwitch on the charger. See below for the correct charging conditions depending on your type of charger. The majority of commercial chargers, particularly home-chargers, are of this type, and allow neither the voltage nor the current to be preset. Use the same procedure as for Constant Potential Chargers in the paragraph above. Boost Chargers Terminal Layout: Negative (-) on left, Positive (+) on right ; with the terminals on the edge of the battery closest to you

Yuasa 12v 60Ah 550A Car Battery YBX3075 (HB075 / HCB075) Yuasa 12v 60Ah 550A Car Battery YBX3075 (HB075 / HCB075) A. Ideally, charge each battery on a separate charger unit. If this is not possible, charge batteries in series. We do not recommend charging batteries in parallel because it is not possible to control the amount of current passing through each battery. If batteries in different states-of-charge are being charged in series, each battery should be removed as soon as it is charged. (If you wait until the last battery is charged, some of the batteries will be overcharged). We receive data from battery manufacturers and this may be subject to change and / or manufacturing tolerances.There are many types of charger available; their working principles and the procedure for using these is given below. Smart Chargers E. If you are charging a battery below 11.00V (over discharged) that has been in service, a specialised charger capable of providing a very high charging voltage may be necessary, and the recommended current may not be obtainable at first. In this case, monitor the current and adjust as necessary during the charge. If a battery has become over discharged, it will have lost both life and performance because of irreversible sulphation. Charging may reduce further its potential life. Constant Potential Chargers