HP JL258A ARUBA 2930F 8G POE+ 2SFP+ SWITCH

Product Information

JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL259A, JL260A, JL261A, JL262A, JL557A, JL558A, JL559A

Aruba Dynamic Segmentation extends Aruba’s foundational, wireless role-based policy capability to Aruba wired switches. That means regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate. Multimode OM3 LC/LC Fiber Optic cable, 5.0m (16.4ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km For J8705A and J8706A modules: All (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007

Documentation:

X132 10G SFP+ LC SR Transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300m (984ft) on multimode fiber - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY Operating temperature: 32°F to 113°F (0°C to 45°C); up to 5,000 Feet, 0°C to 40°C (32°F to 104°F) up to 10,000 Feet X121 1Gb SFP RJ45 T Transceiver - Small Form-factor Pluggable (SFP) Gigabit transceiver using 1000BaseT technology - Has one RJ-45 1000BASE-T port - Requires Category 5 100-ohm UTP or STP cable or better Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km Local MAC Authentication assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

R0X44A/R0X44C auto-detects the inserted type of transceiver; it does NOT require any interface groups like the 8325. Only supported for use in SFP⁠+ ports on JL658A. 100-FX is not supported for use in any SFP56 ports on other models. Only supported for use in the SFP⁠+ ports on R0X43A module. 100FX is not supported for use in the R0X44A SFP28 or SFP56 ports of any other 6400 module. NEW IP multicast routing includes PIM Sparse and Dense modes to route IP multicast traffic (limited to 16 interfaces) Traffic prioritization (IEEE 802.1p) Allows real-time traffic classification into eight priority levels mapped to eight queues

Secure and powerful access

For J8705A and J8706A modules: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 X132 10G SFP+ LC ER transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 40km (24.9 miles) on OM3 fiber cable - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY X121 1Gb SFP SX Transceiver - Small Form-factor Pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m (1804ft) on multimode fiber - Has one LC 1000BASE-SX port X132 10G SFP+ LC LR Transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10km (6.21 miles) on single-mode fiber - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY Increase performance with selectable queue configurations and associated memory buffering that meets your specific network application requirements.

Auto-MDIX provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP⁠+ ports that do not support these 100Mbps transceiver modules.)RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/ 100BASE-TX: half or full; 1000BASE-T: full only X122 1Gb SFP LC BX-U Transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'upstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port For J9310A, J9311A: K.14.50 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D) JL687A 32p 25G module requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the The 8360 32Y4C model requires configuration of interface groups only for ports 1-4 (as group number 1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C model do not support 1G transceivers.