Bath Sealant Strip, Simple Seal Tape, Sealant Tape, Shower Sealant Waterproof Self Adhesive Caulk for Bathroom, Kitchen, Toilet, Wall Corner, Bathtub with Scissor

Product Information

gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Nate Heiking, Kenall's Product Development Engineering Manager, said: "The new SimpleSeal CSSGI luminaire was developed in response to market demand. The luminaire offers a low-profile design suitable for installation into ISO 3-9 and BSL 1-4 cleanrooms, at a low total cost of ownership. The design also allows for ease of access to the internal housing and driver when installed, making it a more serviceable fixture than the competition." gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4. Thumb screws used for FN option. Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Suitable for BSL 1-4 laboratories. Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com.

Impact-resistant diffused acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. ­Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T). Five (5) year warranty against mechanical defects. Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.Filling a market need for a slim, budget-friendly cleanroom luminaire, the fixture's low-profile design allows for minimal intrusion into the highly valued plenum space. All Purpose Acrylic Latex Caulk Plus Silicone ® Premium Molding & Trim Acrylic Latex Siliconized Sealant ® Acrylic Latex Caulk Plus Silicone ® Painter’s Acrylic Latex Caulk ® ALL PURPOSE EASY CAULK ® ADVANCED KITCHEN & BATH SEALANT ® KITCHEN & BATH ADHESIVE SEALANT ® KITCHEN & BATH ADHESIVE CAULK ® Premium Elastomeric Sealant ® Latex Caulk ® POWER POINT ® 300 High Performance Acrylic Urethane Elastomeric Sealant ® POWER POINT ® 230 Advanced Elastomeric Acrylic Latex Sealant ® POWER POINT ® 210 Fast Dry Acrylic Latex Caulk with Silicone ® POWER POINT ® 200 All Purpose Acrylic Latex Caulk with Silicone ® POWER POINT ® 100 Acrylic Latex Caulk ® Kitchen & Bath ® All Purpose ® Kitchen & Bath ® Window & Door ® 3.0™ Window, Door, Siding & Trim ® 3.0™ Kitchen & Bath ® Siding & Window ® Crystal Clear Siding & Window ® 800 Window, Door & Siding ® 3.0™ GUTTER & FLASHING ® ORIGINAL WEATHERSTRIPPING ® Premium 100% Silicone Rubber Concrete Sealant ® Latex Caulk

Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 and IP65 rating per IEC60598. NSF2 Splash/Non-Food Zone. Optional CCEA compliance. Available 3000K, 3500K, 4000K and 5000K color temperatures, 82 CRI; maximum 3-step MacAdam variation allowance. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 330µA maximum source current. Standard 24-gauge (optional 20-gauge) cold rolled steel, hole-free, one-piece, seam-welded construction. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish with 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. This week, Kenall Lighting introduced the CSSGI series: a shallow plenum troffer ideal for cleanrooms and clean spaces, including laboratories, food processing plants, pharmacies, pharmaceutical manufacturing, research centres and more.

gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Housing flange is 18-gauge stainless steel or aluminum with mitered and welded corners. Flange finish matches doorframe except when PAH Housing Option (flange is painted white aluminum).

Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com. gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. Luminaire certification to UL standards by Intertek Testing Laboratories for Wet Location. Certified IP66 per IEC 60598. Certified to NSF2 Splash/Non-Food Zone. Suitable for biosafety labs rated BSL 3 and 4. FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Suitable for installation into -30°C to 40°C ambient environments, unless otherwise noted. Available 4000K and 5000K color temperatures with maximum 5-step MacAdam variation allowance. 277VAC or 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range.Symmetric optic includes diffused, impact-resistant acrylic lens. FN option includes FDA approved Food Zone lens over diffused acrylic lens. The CSSGI is the newest addition to Kenall's robust portfolio of SimpleSeal sealed enclosure lighting. Kenall offers specific expertise in sealed, IP-rated lighting for cleanrooms and clean spaces. With over 60 years' experience in specialty lighting, and a vertically integrated manufacturing facility located in the heart of the Midwest, the Kenall name has become synonymous with quality lighting for challenging cleanroom environments. Available 3000K, 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V; 660μA maximum source current per circuit). Optional 0-10V dimming with 0.1-100% range and dim-to-dark capabilities via eldoLED SOLOdrive series driver (n/a 347V input; ≤0.5V required from dimming control for dim-to-dark operation; 800μA max. source current). The (CSSGI) luminaire offers a low-profile design suitable for installation into ISO 3-9 and BSL 1-4 cleanrooms, at a low total cost of ownership."

Heavy duty extruded marine grade aluminum with anodized finish. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. (10) for 2×2.At a scant 2.5" deep, the CSSGI is available in 2'x2' and 2'x4' sizes, making it ideal for use in ISO Class 3-8 cleanrooms, ISO Class 9 life sciences clean spaces, and BSL 1-4 cleanrooms with grid ceilings. Featuring an edge-lit light engine, the luminaire's high-output, high-CRI lamp source provides uniform lighting across the surface of the lens. As evidence of its certified performance, the CSSGI is available with an NSF2 and IP66 listing.