Hammerite 5092847 400ml Radiator Enamel Aerosol - Satin White

Product Information

An aerosol primer option, using Rust-Oleum’s Surface Primer is going to get the priming work done in record time, but you’ll have to make sure your space is as well ventilated as possible. Surfaces should have protective covers over them and you should ensure you’re protected. For this, we recommend a mask and goggles. That done, prepare your space by moving any nearby furniture out of the way and banishing cats and dogs from the area. Put down old newspaper or cardboard on the floor to protect it from any errant drips and – importantly – open all the windows you can to avoid inhaling fumes from your paint. Right, you’re almost ready to roll. Is there a specific rule on how to paint a radiator? Heat resistant to 190°C, higher than most radiator paints, it is self-priming, so you can paint straight on top of previously painted radiators or bare metal radiators - though we recommend a primer for a better finish. It is touch dry in 2-4 hours, and two coats will be needed if covering a previously white radiator, however, you will need to wait for another 12 hours in between coats. Apply several thin coats. If applying to a smooth vertical metal surface, abrade the surface with a side to side action using a coarse sandpaper. How do I paint Hammerite onto a painted surface?

One or two coats of Rust-Oleum will be ample to get your heat-throwers looking like new, and there’s no need to apply primer first as this paint has primer mixed in. This means you skip an entire stage of the painting process, but the trade-off is that it will take longer to dry. Depending on how much paint you use, the average job will be touch-dry in one to two hours and fully dry in eight. But if a second coat is required, you’ll need to wait a whole 16 hours before it’s ready. In total, then, Rust-Oleum recommends waiting seven days for true dryness. But, if you can wait, why not? If you want a smooth factory like finish for your radiators your best choice is to invest in a spray can like this offering from metal paint specialist Hammerite. This 400ml can offers around two square metres of coverage. That’s about enough for two coats on a large radiator.Available in 13 subtle colours, your first – and possibly only – coat should be touch-dry within a couple of hours. If you judge a second coat necessary, leave at least three to four hours to ensure ideal conditions. To get the best finish, rub down the radiator with sandpaper and remove all dust and debris afterwards. From Johnstone's Speciality range this paint has been specially formulated to work on all types of metal radiators — and metal hot water pipes. This means you can paint your pipes to match your radiator.

If your radiator looks almost beyond saving, if the stains on it are themselves heavily stained and if it would look much more at home in a skip than in your home, you need Zinsser 123 Bulls Eye. Primer paint is also widely available in aerosol format. If that’s your tool of choice, you’ll want to pop on a mask and spray in upwards and downwards strokes at a distance of around 8in. Once fully coated, wait for the primer to dry completely. Depending on your preference, the radiator can be painted whilst on or off the wall. If it is being painted whilst on the wall, ensure that the wall behind and floor underneath are fully covered. Fed up with white radiators and fancy a cool contemporary colour instead? Then this Anthracite Grey enamel satin paint is a good choice to give your radiator a modern twist.There comes a time in every adult life where you can no longer avoid those most mundane of tasks: painting something as fiddly as a radiator. But radiators need love too. After all, once your walls and door frames are looking bright from a recently applied coat or two, the radiators will look all the more shoddy and dilapidated by comparison. Formulated to provide a heat-resistant brilliant white finish on radiators,Radiator Enamel prevents both yellowing and rust, and creates a tough, long-lasting finish. As it’s an aerosol, make sure ventilation is ample and, as there’s also a strong element of “spray ‘n’ pray”, ensure walls and floors are copiously covered in newspaper so that the fine mist of paint you’re generating doesn’t ruin your house and your day. Once ready to paint, apply as you would a top-coat, covering the sides and top before using overlapping strokes to work the primer across the face. Dry in 30 minutes, you can recoat in 60, or if you’re happy with your work and all stains are hidden, move straight to painting – radiator saved. If satin is your finish of choice, than this specially formulated Hammerite Radiator Paint Satin is ideal for you. It provides a heat resistant brilliant white finish on water-filled household radiators and hot water pipes. If you are going to paint a radiator you really need to be using a specialist radiator paint to get the best finish. But you are very much limited by what colour you can choose when dealing with specialist radiator paints. They typically come in white in satin or gloss finishes that mimic the factory finish you get on most modern radiators. There are other colours available but there is a good chance you won’t get the exact colour you want to complement your walls.