Granite, Marble & Stone Adhesive - CLEAR SCA

Product Information

Adiseal is the record breaking strongest adhesive& sealant. It has proved it’s the best product in an independent adhesive strength test by Ultimate Handyman. Adiseal is a waterproof sealant and waterproof adhesive so it is also suitable for use outside. It also seals underwater & glues underwater. In general, the best option for granite is going to be Loctite’s PL530 construction adhesive. It’s specially formulated to be able to adhere to polished surfaces, including granite. While Adiglue can be used, it’s not as strong or flexible as Adiseal and Adiseal Hi-Grab. If using Adiglue, clean the granite, and use temporary supports as needed until the adhesive cures.

Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners.Once you’ve chosen the glue that is right for your project, you need to follow carefully the glue’s directions for application. Some types of glue need to be mixed together, while others can be used on the glue already on the granite. It only works on electro-copper-plated glass mirrors, which shouldn’t be a problem if you only want to use the glue for granite-related projects. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings.

Heavy Natural Stones also need to be installed on a strong cured screed bed to sustain these heavy loads and the cement sand bed isn’t strong enough to withstand these loads. Once clean, apply adhesive to wood or stone and firmly press them together. In areas prone to water exposure, apply Adiseal in thin vertical strips to allow water to flow down instead of accumulating behind the bonded items, preventing potential expansion in cold temperatures. Adiseal is suitable for bonding various plastics to stone. Before applying the adhesive, ensure the plastic is thoroughly cleaned to remove any dust, oil, grease, paint, or dirt. While not always necessary, lightly scratching the plastic’s surface can enhance the bond’s strength by increasing the surface area. While Adiglue can be used, it’s not as strong or flexible as Adiseal and Adiseal Hi-Grab. If using Adiglue, clean the slate surfaces, and use temporary supports as needed until the adhesive cures. Safe and non-toxic】We insist on the production of exclusive ceramic glue formula, which has passed MSDS, SGS and various safety reports. Our stone glue is clear, odorless and environmentally friendly products, 100% safe. Many other stone glues are just called stone glues, but the ingredients are just ordinary glue or even inferior glue, which will cause undetectable damage to your health.To effectively bond metal to stone, ensure clean surfaces. Remove oil coatings from some metals with Adisolve. For a stronger bond, scuff the metal surface (not always necessary), then clean it thoroughly. Apply adhesive and press the metal onto the stone. Use Adiseal Hi-Grab adhesive or temporary supports if there’s a risk of sliding. Care must be taken to remove all loose material, debris, dirt, grease, paint and efflorescence from the wall or floor surface prior to applying the cladding adhesive. The concrete, masonry, wall substrate should be thoroughly dampened with water. Any surplus water should be removed prior to starting the application of Slipbond.