276°
Posted 20 hours ago

Handmade Rustic Wooden Chandelier - Wood Beam Industrial Pendant Lamp

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Then, mark two more spots on the board, 3-1/2″ from each end to the center of the board (3″). These marks are where the eye bolts will be placed to hold the metal chain. Then, spray paint the pieces according to the directions on the can. Remember lighter coats are better when applying spray paint. SIDE NOTE: Our center point was centered between two trusses, so adjust these steps to fit your space. Pendant lights work well in almost any interior style – after all, you always need light for you dining table! Take one of the screws and push it through each of the pre-drilled holes. Make sure you apply pressure so that it indents into the drywall.

Now you need to determine where the trusses (studs) are in the ceiling and which way they are running. You have to attach the ceiling support to at least two trusses in four places to hold the weight of the beam. Whether you dine in style under the light of a modern wooden hanging light or in the comfort of a more rustic style, here are some tips for the new wooden hanging light in your dining room: Now, mark the middle of the trusses for where the end of the wood ceiling support will sit. This will be the distance from one wall to your first marked beam center plus 3″ (half of the size of the wood support).Once one side was cut to the 6″, the other side could be cut on the table saw. This second cut is the 2″x6″ board for the ceiling support. We cut this board to 27″.

On the front of the wood ceiling support, mark each corner of the board 1-1/2″ from each side; there will be four marks. These four marks will be where the wood is attached to the ceiling. Beams are an essential part of construction, as they provide the required structural support between two areas. They can be made from metal or wood—in this article, we will be covering wood beams along with their characteristics and usages.

Required Cookies & Technologies

After you find the two trusses by your center point, mark them. You want to make sure you are finding the center of each truss. Most stud finders find the end of the truss and most trusses are 1-1/2″ in size. So the center is 3/4″ from an end.

Once suspended from the ceiling, wooden pendant lights often sit just above eye level, so they’re sure to attract attention. This makes them a perfect fit for the dining room – more precisely, for over the dining table. Make sure to pay attention to the colour rendering. This is another feature of the light source which can found alongside the luminous colour in the product details section. If the colour rendering is below Ra 80, it won’t be ideal for dining.

When the bolts were installed, I attached the first chain and marked the length I wanted it to be. I then marked this length on all four chains and cut them to length using an angle grinder. With this done I attached all chains to the bolts. SIDE NOTE: There is electrical work involved in this project, so please make sure you turn OFF the power to the lightbox . I am not an electrician and you should be aware that there are dangers in doing this project yourself, so please be careful. STEP 1: MARKING YOUR CEILING FOR PLACEMENT

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment