Libre Computer Board ROC-RK3328-CC (Renegade) Mini Computer with Gigabit Ethernet and USB 3.0 (2GB)

Product Information

For a different topic, and I think that was already a known issue, but when sending a shutdown command through the console the board reboots instead of halting. Was that by design or just an oversight? Overwriting the systemd shutdown.target with halt.target might be a solution but I haven’t tested it yet. I definitely concur with this. The 1080P will be comfortable to use. Not perfect but you won’t be miserable or angry with me because it should be pretty comfortable in 1080P unless something else is wrong like you have a rogue service wasting a bunch of resources on the Potato or some other explanation. If you have a high enough technical skill level all of the instructions on what you’d need to do are technically in that script and it absolutely can be done. Another option is Libre Computers offers and advertises that they will port any OS for you as a commercial service so that’s worth noting as well. Adding ‘diversion of /etc/network/interfaces to /etc/network/interfaces.real by homeassistant-supervised’

You can use the tool on any of these versions and it will enable it to boot on the Libre Computers boards.On a basic level, it achieves this by modifying the files within the Raspberry Pi OS microSD card to include the necessary files to boot your Libre Computer SBC from the same OS image. Still, I'd highly encourage Libre Computer Renegade adoption. Though the Raspberry Pi 3 wins the match up, the ROC-RK3328-CC is a more than competent board which largely holds its own. With 4K output, it's a nifty little multimedia device. Plus, the Libre Computer Renegade functions well for network attached storage (NAS) purposes either with OpenMediaVault or a roll-your-own server build. The best way to find out what kind of issues you will run into is to try it though. It’s going to have almost nothing to do with the Renegade how it performs. It’s going to depend on the OS you’re running. Once I was able to login with the new user I created, I plugged in my AC1200 USB RT8822BU based WIFI adapter and was surprised to find it was found and configured, showing me a list of available WIFI APs. I connected to my intended access point and saw that an IP was assigned successfully. Unfortunately, I couldn’t ping in or out, even to LAN devices. After looking into this on a higher Debian based level, I found out that your DHCP configuration may have issues or not fully supported by hardware.

In light of this, I’ll be using the Libre Computer Renegade Elite and the Raspberry Pi 4 as I quite like the idea of doing a comparison of these in the future, and using the same image seems like a good idea! Things to note! The latest Raspbian images are different than before. There is no longer a pi user. See a full list of changes on Raspbian release notes. You can use Raspberry Pi Imager to perform this setup through the GUI on first boot or you can pre-configure the image by adding files in the first partition (/boot/efi): In addition, as the MIPI cameras, DPI displays, and DSI panels are pieces of Raspberry Pi-specific hardware, these would not be supported on the Libre Computers with the same image. No diversion ‘diversion of /etc/network/interfaces to /etc/network/interfaces.real by homeassistant-supervised’, none removed. While my Raspberry Pi and Odroid XU4 are currently go-tos for retro gaming and HTPC needs, aside from my Nvidia Shield TV, I'll keep using the Libre Computer Board ROC-RK3328-CC as either an Android desktop or a lightweight server. Its capable processor and a whopping 4GB of RAM make the Libre Computer Renegade a beefy yet energy efficient mini computer. Moreover, compatibility with Raspberry Pi cases ensures that you can find accessories for the Libre Computer ROC-RK3328-CC.Comment out all configuration options and add the following at the bottom of the file. This is a public Google DNS server.

I really like the idea of this script as during the Raspberry Pi shortages we’re still seeing (and are likely to see into mid-late 2023), it offers a very real alternative in the form of Libre Computer’s lineup. If you’re comfortable with the Raspberry Pi OS and the software support surrounding that, you’re going to be able to continue using it with a Libre Computer board. You may even have an old, dead Raspberry Pi that you can take the operating system from! Ultimately, there are tons of neat cases for the Libre Computer ROC-RK3328-CC Renegade. It's a beefy single-board computer hampered only slightly by less support than competing boards like the Raspberry Pi and even Odroid XU4. Despite minor shortcomings, there's decent operating support, from Libre Computer Renegade Linux OSes to Android, and dedicated media server software. The board will try to read the bootloader from the eMMC and then the MicroSD card from sector 64 (32KB). If the correct signed bootloader is detected, the board will begin loading it.Further, I enjoy how the Libre Computer ROC Renegade boasts compatibility with Raspberry Pi accessories. It's got fewer USB port than a Raspberry Pi 2, 3, and 3 B+. Nevertheless, it fits in virtually every Raspberry Pi case on the market. I used a new case for my Libre Computer Renegade, but tested it in my RetroFlag NESPi case and it worked like a champ. Overall, Android on the Libre Computer ROC Renegade delivers a phenomenal experience. General web browsing is snappy, and it ran virtually every app I threw at it. I mostly concentrated on multimedia use such as video streaming and gaming, although it's perfectly suitable as a basic Android desktop. Hulu didn't play, but that seems like an issue of running the app on an uncommon Android OS. Who Should Use Android on the Libre Computer Renegade? Spinning up a Libre Computer Renegade project is fairly simple. You'll just need a few items to get started. First, the Libre Computer ROC-RK3328 board itself. You'll also need a 5V 2.5A micro USB power supply. For installation media, a microSD card and an operating system are required as well. A case is optional but recommended.

For anyone who has tried to move from a Raspberry Pi to an alternative device before this utility really stands out as a compelling reason to choose a Libre board over some of the competitors. I definitely recommend giving it a try! Other Resources For a low-powered Linux desktop, try Ubuntu, Armbian, or Debian. OpenMediaVault provides the ability to cobble together a simple media server with a Libre Computer Renegade. Android 7.1 or Station OS offer the best HTPC and gaming capabilities with Android apps such as RetroArch, emulators, Netflix, Plex, and Kodi. While there's no Libre Computer RetroPie image for the Renegade, you may be able to install RetroPie via Ubuntu. Alternately, Station OS delivers tons of video and gaming optimization, including the Kodi media center with 4K support. Libre Computer Renegade Review For the latest S905x server image uploaded on August 10th, at least, there isn’t an asound.conf in /etc/alsa, only a ‘conf.d’ folder containing the file ‘50-pipewire.conf’

Best Raspberry Pi 3 Alternatives (Updated September 2020)

After a couple of minutes, you should see the device pop up on your network (you’ll also see a flashing activity LED on the board itself to indicate life) meaning that it’s ready to go! Neofetch showing Raspberry Pi OS running on the ROC-RK3399-PC! After that, mount the OMV image to a microSD card with a program like Etcher. When your Libre Computer Renegade OMV OS is properly mounted, pop the microSD card in your Libre Computer ROC Renegade and power on the SBC. OpenMediaVault Libre Computer Renegade Review: A Simple DIY NAS Box After 30 seconds, Linux should be loaded and the Green LED should begin to heartbeat. You should see video on your HDMI display. Certain types of displays with odd resolutions are not supported at this stage and it might not display anything during this step and the next steps. If the Green LED turns green and nothing shows on your screen, please post your screen brand, model, and EDID here. a. If you followed steps 1 through 5 correctly, the board should boot up. LEDs on the board will change if the bootloader is successfully loaded from the storage medium. If you are moving from a Raspberry Pi to a “Renegade” see my Raspbian Portability Tool for Libre Boards Guide