Silverline Mini Pipe Bender 6 - 10mm (MS129)

Product Information

Many pipe benders or tube bender kits will be designed for a specific job or application, so choose wisely. It isn't too good for very tight radii,I resorted to the groove in a piece of bar method mentioned above when making new cylinder drain pipework. If you are going to try this method, I would suggest Woods Metal, available from Reeves ( possibly other suppliers too? This is one of the reasons plumbers prefer to use a copper pipe bender rather than simply cut the pipe and put a bend fitting like an elbow into the run to change direction. Free standing pipe bender - Free standing pipe benders are the biggest, most robust type of bender for heavy duty applications.

To use a pipe bender, simply place the pipe in between the two levers, then pull the adjustable lever until the desired angle is achieved. Pipe springs can be used in pipes up to 22mm diameter but bending a 22mm pipe with a spring is a herculean task which none of us would attempt. Their easy-to-use design make them a must-have for any kind of metal pipework or plumbing application.Pipe fittings change direction very quickly to allow tight corners to be formed but the very tightness of these corners can reduce the effectiveness of the pipe run. When the handles are pulled together, the stay (3) which is attached to one of the handles, pulls the pipe down and around the wheel former creating the bend. We and our partners use data for Personalised ads and content, ad and content measurement, audience insights and product development.

You will not see many plumbers using springs however as it is very hard to keep the bend neat and to the correct diameter. If trying to make small radius bends in 1/4" copper pipe, any idea please, of what would be the smallest practical radius possible?

While I was replumbing the 5" gauge Class 5 loco that I own,I made use of a Record mini pipe bender,and found it easy enough to use. Copper plumbing pipe can be bent properly either with a bending spring or a proprietary plumber's pipe bender which reduces the number of fittings that need to be used. The user then pulls the level as necessary to pressure the pipe into forming a perfect bend around the shoe.

It can be a little tricky bending pipes if you have never done it before so in this guide we will show you how to bend copper pipe using a bending spring or plumbers pipe bender. Its not actually difficult to bend the pipe, but bending the pipe in the right place is a different ball game. Automatic pipe benders are available - however many professionals prefer the simplicity and manual control achieved with a manual pipe bender.In this project you will learn how to a bend copper pipe with a bending spring or a plumbers pipe bender. To try and achieve a reasonable and tidy appearance, I thought the use of a pipe bender would be better than bending by hand. Another method is to machine a groove in a piece of bar, the groove width being the diameter of the pipe and the inside diameter to suit the radius of the bend.

If you are prepared to make one, Stan Bray described a small pipe bender in Model Engineer Volume 157, number 3783. Also, as with any other system in a house which contains many parts, the greater the number of pieces involved, the more there is to go wrong.Pipe benders come in a variety of sizes catering for copper pipes from 6mm to 38mm and are operated by hand. Dual pipe bender - Dual pipe benders are the most common type of bender and are available in a wide range of shapes and sizes. However, if the stay was allowed to come in contact with the pipe directly, as soon as you pulled on the handles the stay would crush the pipe. They are designed to withstand the pressure put on them when bending a pipe, whilst still maintaining a flawless bend in any given pipe. The handles (2) are opened wide which allows the hook (1) and the stay (3) to be in a straight line.