Martindale CP501 Classic Check Plug 240V Socket Tester, Blue

Product Information

The earth wire, used to safely discharge excess current, is not wired to the intended terminal. Neutral Fault or Missing Neutral

Audible indication which can double up as a basic fuse finder. Whenever the correct fuse is pulled, the Buzz-It sounder goes silent.Logical Lighting – SOK36 uses the green lighting for the same universal purpose to indicate that all is well. Advanced and professional categories measure and display ranges or numerical values for earth loop impedance, while the simple category will not show when earth fault loop impedances are excessive. Clear LED indication – Once you plug it in, the wiring status is brightly captured through the LED indicators. Voltage test – Using a high voltage source, you can perform this test using the EZ150. The basic aim of this test is to monitor current leakage as the voltage to advise is enhanced. On the other hand, the advanced and professional testers not only test a much wider range of faults, but measure how effective the protective earthing is as well. In their display, the advanced and professional testing devices will show either the numerical value of the loop impedance or the range of values within which the earth fault loop impedance lies. 2. Quality

This reading indicates a fault in the live or hot wire. It may be damaged or wired incorrectly, for example. The live wire is sometimes indicated by the letter P (power). Gives a continuous tone to indicate that the results are satisfactory. For faults, the device gives a warble tone. Testing the power and wiring of electrical outlets is an essential safety practice and one that should be undertaken regularly to catch any developing faults.Modern ergonomic design – The soft finger grip is a unique design feature not found in many testers. This makes handling safer and more comfortable. These offer more advanced testing functions, including earth fault loop impedance readings i.e. the amount of resistance encountered by faulty current flowing to the earth wire and terminal. Indicative Tones – The device gives a continuous audible tone which means the wiring is good. However, when you hear a strong warbling tone, it is a clear indication that your wiring is faulty. Bright LEDs – This lighting is stronger and more vibrant than neon. It brings to your attention what the issue is in a more noticeable manner. Durable and compact – This tester is designed to meet the safety requirements stipulated under the BS EN 61010-1:2010 standard for electrical equipment used in control, measurement, and laboratories.