276°
Posted 20 hours ago

Ram memory 8GB kit (2 x 4GB) DDR3 PC3-12800,1600MHz, 204 PIN SODIMM for laptops

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Understanding DDR3 Serial Presence Detect (SPD) Table". simmtester.com . Retrieved 12 December 2015. Alternative naming: DDR3 modules are often incorrectly labeled with the prefix PC (instead of PC3), for marketing reasons, followed by the data-rate. Under this convention PC3-10600 is listed as PC1333. [25] Serial presence detect [ edit ] The DDR3 standard permits DRAM chip capacities of up to 8 gigabits (Gbit), and up to four ranks of 64 bits each for a total maximum of 16 gigabytes (GB) per DDR3 DIMM. Because of a hardware limitation not fixed until Ivy Bridge-E in 2013, most older Intel CPUs only support up to 4-Gbit chips for 8GB DIMMs (Intel's Core 2 DDR3 chipsets only support up to 2 Gbit). All AMD CPUs correctly support the full specification for 16GB DDR3 DIMMs. [1] History [ edit ] Our energy supplier is working towards using 100% renewable electricity and is a Principal Partner of COP26

In February 2005, Samsung introduced the first prototype DDR3 memory chip. Samsung played a major role in the development and standardisation of DDR3. [2] [3] In May 2005, Desi Rhoden, chairman of the JEDEC committee, stated that DDR3 had been under development for "about 3 years". [4] Bryan, Gardiner (April 17, 2007). "DDR3 Memory Won't Be Mainstream Until 2009". ExtremeTech.com . Retrieved 2009-06-17. Soderstrom, Thomas (2007-06-05). "Pipe Dreams: Six P35-DDR3 Motherboards Compared". Tom's Hardware.

Speed & Peak Performance

DDR2 PC2-4200 (commonly referred to as DDR2-533) memory is DDR2 designed for use in systems with a 266MHz front-side bus (providing a 533MT/s data transfer rate). The "4200" refers to the module's bandwidth (the maximum amount of data it can transfer each second), which is 4200MB/s, or 4.2GB/s.

Addendum No. 1 to JESD79-3 - 1.35 V DDR3L-800, DDR3L-1066, DDR3L-1333, DDR3L-1600, and DDR3L-1866". May 2013 . Retrieved 2019-09-08. DDR3L VDD/VDDQ requirements - Power Supply: DDR3L operation = 1.283 V to 1.45 V; DDR3 operation = 1.425 V to 1.575 V .. Once initialized for DDR3L operation, DDR3 operation may only be used if the device is in reset while VDD and VDDQ are changed for DDR3 operation Release 4 of the DDR3 Serial Presence Detect (SPD) document (SPD4_01_02_11) adds support for Load Reduction DIMMs and also for 16b-SO-DIMMs and 32b-SO-DIMMs. Addendum No. 1 to JESD79-3 - 1.35 V DDR3L-800, DDR3L-1066, DDR3L-1333, DDR3L-1600, and DDR3L-1866". May 2013 . Retrieved 2019-09-08. DocMemory (2007-02-21). "Memory Module Picture 2007". Archived from the original on 2017-06-06 . Retrieved 2022-01-05. Salisbury, Andy (2009-01-20). "New 50nm Process Will Make DDR3 Faster and Cheaper This Year". Pcgamer . Retrieved 2009-06-17.According to JEDEC, [11] :111 1.575 volts should be considered the absolute maximum when memory stability is the foremost consideration, such as in servers or other mission-critical devices. In addition, JEDEC states that memory modules must withstand up to 1.80 volts [a] before incurring permanent damage, although they are not required to function correctly at that level. [11] :109

Compared to DDR2 memory, DDR3 memory uses less power. Some manufacturers further propose using "dual-gate" transistors to reduce leakage of current. [10] a b "What is LR-DIMM, LRDIMM Memory? (Load-Reduce DIMM)". simmtester.com. Archived from the original on 2014-09-03 . Retrieved 2014-08-29. JEDEC Solid State Technology Association announced the publication of JEDEC DDR3L on July 26, 2010 [35] and the DDR3U in October 2011. [36] Feature summary [ edit ] Components [ edit ] DDR3 dual-inline memory modules (DIMMs) have 240 pins and are electrically incompatible with DDR2. A key notch—located differently in DDR2 and DDR3 DIMMs—prevents accidentally interchanging them. Not only are they keyed differently, but DDR2 has rounded notches on the side and the DDR3 modules have square notches on the side. [16] DDR3 SO-DIMMs have 204 pins. [17] ECC memory, which has an extra data byte lane used for correcting minor errors and detecting major errors for better reliability. Modules with ECC are identified by an additional ECC or E in their designation. For example: "PC3-6400 ECC", or PC3-8500E. [29]Power consumption of individual SDRAM chips (or, by extension, DIMMs) varies based on many factors, including speed, type of usage, voltage, etc. Dell's Power Advisor calculates that 4GB ECC DDR1333 RDIMMs use about 4W each. [20] By contrast, a more modern mainstream desktop-oriented part 8GB, DDR3/1600 DIMM, is rated at 2.58W, despite being significantly faster. [21] Modules [ edit ] List of standard DDR3 SDRAM modules In addition to bandwidth designations (e.g. DDR3-800D), and capacity variants, modules can be one of the following: McCloskey, Alan, Research: DDR FAQ, archived from the original on 2007-11-12 , retrieved 2007-10-18 Another benefit is its prefetch buffer, which is 8-burst-deep. In contrast, the prefetch buffer of DDR2 is 4-burst-deep, and the prefetch buffer of DDR is 2-burst-deep. This advantage is an enabling technology in DDR3's transfer speed.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment