Hammerite REG500 500ml Radiator Paint - Gloss White

Product Information

Fortunately, as long as the rust is just on the surface and hasn’t penetrated the steel below, you can remove the rust easily with non-chemical remedies. Here’s how: The surface of a radiator requires two coats of paint. However, you should let the first coat of paint dry off completely before you continue painting your radiator.

If you want to brighten up a room by painting it a colour, but don’t want your radiator to stand out like a sore thumb, you can paint it to match your colour-scheme. Preparation Before Painting Your Radiator Important: Depending on how old it is, the paint on your radiator could include lead, which can be harmful, particularly to children and pregnant women. If you’re unsure it’s important to get advice from a professional who will be able to advise on the best course of action. After that, apply some specialist radiator primer paint on the top edge and the bottom edge of the radiator. Move the brush along the edges of the radiator. Move it in long sweeping strokes to get effective results. Step 7: Brush or Roller? Once the angle grinder is connected to a power source, place it on the surface of the radiator, then press the trigger. The disc will start rotating. Move the angle grinder on the surface of the radiator to get rid of the rust. Make sure that you move the disc on those hard-to-reach spots. Step 5: Clean the Surface of the Radiator Again

Once ready to paint, apply as you would a top-coat, covering the sides and top before using overlapping strokes to work the primer across the face. Dry in 30 minutes, you can recoat in 60, or if you’re happy with your work and all stains are hidden, move straight to painting – radiator saved.

You will need to use either a metal primer or specialist radiator primer first to ensure that any bare or rusted areas are protected, and to give a good base for subsequent coats to adhere to.Clean your radiator first to remove any dust and grease that have built up over the years, then dry it and rub down lightly with fine sandpaper or wet and dry paper – this is to give a slightly roughened surface for the paint to adhere to. That done, prepare your space by moving any nearby furniture out of the way and banishing cats and dogs from the area. Put down old newspaper or cardboard on the floor to protect it from any errant drips and – importantly – open all the windows you can to avoid inhaling fumes from your paint. Right, you’re almost ready to roll. Is there a specific rule on how to paint a radiator? Before painting a rusty radiator, the rust must be removed by either sanding it down or following the natural remedies above. Once all the rust has been removed, or at least the flaky bits, you can add a specific radiator primer to protect it.

We advise you to use radiator paint if you are painting your radiator white, as other paint types can go yellow over time. Solvent-Based Paints Easy to apply by brush, roller or electric sprayer, give your horizontal, vertical and column radiators an instant refresh with long-lasting coverage that’s non yellowing and resistant to mould. If spraying, paint should be diluted with water by 10-20% as required. Two coats are recommended When dust-free, give the radiator a wipe down with a TSP solution (trisodium phosphate). This cleaning agent is a great degrease and helps to de-gloss the surface to prepare it for painting.Primer paint is also widely available in aerosol format. If that’s your tool of choice, you’ll want to pop on a mask and spray in upwards and downwards strokes at a distance of around 8in. Once fully coated, wait for the primer to dry completely. If the paint is washable, its a bonus point for you because it can be easily cleaned and wiped. The best paints are the one that is tough, hard-wearing, and durable. They stay adhered to the surface for longer, and they show remarkable resistance to rust, moisture, scratches, and scuff. One or two coats of Rust-Oleum will be ample to get your heat-throwers looking like new, and there’s no need to apply primer first as this paint has primer mixed in. This means you skip an entire stage of the painting process, but the trade-off is that it will take longer to dry. Depending on how much paint you use, the average job will be touch-dry in one to two hours and fully dry in eight. But if a second coat is required, you’ll need to wait a whole 16 hours before it’s ready. In total, then, Rust-Oleum recommends waiting seven days for true dryness. But, if you can wait, why not?

With a heat resistant formula, withstanding temperatures of up to 60C, this low odour, water-based radiator paint is durable against everyday scuffs and scratches To apply the coat of primer you may have to invest in an angled radiator brush if you have an unusually shaped radiator. If you’ve decided to use a metal primer spray, make sure you have the surrounding surfaces protected as this could get very messy. If your radiator looks almost beyond saving, if the stains on it are themselves heavily stained and if it would look much more at home in a skip than in your home, you need Zinsser 123 Bulls Eye. Once sanded down, the radiator needs a good clean. Get hold of some dryer vent brushes for this next part. These brushes have been designed with a flexible coil for easy access to hard-to-reach vents, and they are also great for getting in between the fins of a radiator and clearing dust and dirt out of the inside.

How to fix a rusty radiator

Top tip: It may be worth using an anti-corrosive primer as this will prevent the rust from getting worse over time. If unsure, speak to a decorator who can advise you. If you are spraying the paint, do take precautionary steps, so it doesn’t cause any allergic reaction to you.