LG Original Remote Control AKB74815301

Product Information

This is more common when you’re watching TV using a set-top box such as a Sky or Freeview box. Even if your set-top box is connected to your TV and your TV to your soundbar, you may find the audio only gets to your TV's speakers. Your soundbar or TV’s remote control can stop working for a couple of reasons. It can be that you haven’t changed batteries in a long time. Or that your remote is not transmitting an IR signal. 1. Low Batteries I have created Cinema Equip to walk you through everything you need to know about making your own home cinema. From audio to picture quality, setup to troubleshooting, I have you covered.

All codes reported working with LG Soundbar models: NB2022A, NB4530, LSB316 Soundbar, NB3510A, NB3532A, NB3520A, NB3530A, NB2540, NBN36 280 watt, LG 300W, LAS454B, LSB 316 Sound Bar with wireless Subwoofer, etc. While the instructions above are a general way to go about connecting and controlling your soundbar with your TV, many TV manufacturers (and computer makers – our guide) have slightly different ways of going about it. Based on your TV manufacturer, find your listed brand and follow the instructions below. SamsungWith a digital optical connection to the soundbar from your Samsung TV, hold the left direction on the Samsung TV remote’s direction pad to activate or deactivate Auto Power Link, which only works with an optical connection. Be sure to also change the TV’s audio output settings, so the soundbar will be controlled by your TV remote. Press the Stop on the Sound bar. Then, hold the number six button on your remote control for five seconds. First, turn the device off. Also, unplug all the soundbar connections. Then, from all of your devices, forget the soundbar.

Apply the TV volume IR into the LG Soundbar. OR… Use AUX mode on your CABLE/SAT remote to control the sound bar as the newer remotes will accept the codes under the AUX mode.The digital optical and HDMI ARC connections are made just like the instructions above. You’ll use the Sound > Sound Out area to change the output to HDMI or optical. If you've tried our advice but still have a soundbar that's not functioning properly, it might be time to invest in a new one. If the DirecTV remote does not turn the soundbar ON or OFF, use the middle PWR key in the AV1 or AV2 device as this will control a Soundbar.) When using an optical connection, the setup is the same as the instructions above. After your optical cable is connected to both your soundbar and TV, you will go to the TV settings, turn off the TV speaker, and change the source to ‘Optical’. When it comes to LG TVs, there are a few different ways of connecting to soundbars, and LG TVs come with the LG Magic Remote. You can connect your soundbar to your LG TV through Sound Sync via Bluetooth, a digital optical connection, or an HDMI ARC connection.