About this deal
The steam shot only works on the steam or high steam settings. To use it, simply lift the iron off the fabric and press the steam shot button, which can be found to the right of the steam control button. You have to leave four seconds between shots to allow the temperature to build up. Put the iron in a horizontal position and wait for a while before using the (vertical) steam boost function again. If the iron is motionless, it will switch off after about 30 seconds lying down, or about 8 minutes if it’s upright.
Answer 1: The steam control may have been set to the no steam position. Set the steam control to a steam position. To avoid scale build up, use the self clean function at least monthly in normal water areas, more often in hard water areas. Your iron has multiple thin layers of coating and light scratches will not impede the performance of the iron. You can continue using the iron as per normal. The Russell Hobbs Powersteam Ultra is heavier than both the cordless Morphy Richards Easy Charge Power+ and lightweight Tefal Easygliss Eco, but the Russell Hobbs benefits from having a longer cord, so despite its weight, it feels less restrictive than the Easygliss Eco. Also, if there is remaining water in the soleplate from the last usage, the smoke observed may actually be water evaporating. However, these will stop after a short while.Your iron produces a lot of steam. Steam could have condensed on the ironing board cover, making it wet and cause water marks on your garment when the iron is pressed on it. The ceramic soleplate ensures smooth and efficient ironing, while the variable steam function allows users to tailor the steam output to the fabric being ironed. Its anti-scale system and self-cleaning function help to prolong the lifespan of the iron by preventing limescale buildup. The anti-drip function prevents excess water from dripping onto fabric during ironing, while the auto power-off feature ensures safety and conserves energy. Also, to prevent shiny patches, you can put a cloth (e.g. a tea towel) between the iron and the fabric.
Make sure the iron is plugged into a working mains power and set the temperature dial to a desired position.Read next: Best lint remover and fabric shavers to get rid of lint, hair and bobbles from clothing Does the Russell Hobbs Powersteam Ultra offer value for money? To switch on again, lift it up, tilt it forward, then sit it upright to return to operating temperature. No settings are lost during auto shut-off. It is normal for the orange pilot light to turn on and off during ironing. It comes on as the iron is heating up, and goes off when it is hot enough. Answer 2: The iron is not hot enough. Set the temperature dial to a temperature suitable for steam ironing.