DrayTek Vigor 130 VDSL2/ADSL2+ (FTTC/BT Infinity) Gigabit Ethernet Modem

Product Information

The above are the correct settings for the majority of UK ISPs so you do not need to change any settings on your Vigor 130 or access its web interface.

Firmware 3.8.4 BT - DrayTek

I currently have these configured and ready to go, as standby modems if my Vigor 130 was ever to fail. To log into your Vigor router, for example to configure it or check its status, use your standard browser(Internet Explorer, Edge, Safari, Firefox, Chrome etc. When connected to a router, the router itself is responsible for making the connection and the modem passes through the WAN IP. I have achieved comparable speeds and stability from using Billion 8800NL and 8800NL/R2 routers configured in modem only bridge mode (and wireless disabled). Each DrayTek modem is designed to offer stability and extensive compatibility across internet providers for a seamless online experience.If it's going to be used to connect a router without its own modem, the Vigor 130 and Vigor 166 are ideal, they work as VDSL / G. When the DSL LED is lit solidly, the Vigor 130 has established the link to the DSL line and can be used for bridging. This avoids double-NAT scenarios where the modem passes a local IP address to the router, rather than the real WAN IP address. These steps need to be completed before 2021-05-22 or the WCF and DrayDDNS services may not work as expected.

Vigor 130 Setup with DrayTek routers

Upon restarting, the modem will no longer provide an IP address through DHCP, which is required by the MPoA Bridge Mode configuration, for full bridging to take place. Note :The stated throughput performance figures are the maximum derived from DrayTek internal testing, conducted under optimal conditions, with Hardware Acceleration enabled where available. You should update at your earliest opportunity, 'Critical' is our second level of firmware priority (1 is 'Emergency' and 3 is 'Update when convenient') so whilst this update does not relate to a known 'in-the-wild' or WAN-side vulnerability, you should still upgrade your product as soon as possible.To do this, plug a laptop or PC into the LAN port of the modem and wait for it to receive an IP address. Each DrayTek modem offers BT Superfast Fibre and ADSL as standard, and we also have two designs to suit your business requirement of either one or two LAN ports. Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults.

Vigor Router? - DrayTek How do I log into a Vigor Router? - DrayTek

The Vigor 130 is a pre-configured VDSL2 / ADSL2+ modem that takes a VDSL2 or ADSL2+ connection and performs full pass-through / bridge to Ethernet presentation, which can then be used by a device such as a router to connect directly to the internet. Meanwhile, routers can read the new messages to create a local network for your devices but cannot connect directly with an internet provider. There is also a Fixed IPsetting, set this to Yes if a static IP address needs to be used and enter that IP address. You may get a warning about your server (the router) having an invalid certificate and your browser will demand further confirmation or exception before allowing access. We have upgraded the system architecture for MyVigor server, and now require your help to complete the upgrade process.Whilst its in the early stages i've found it much easier to control and understand how the system is behaving. fast, VDSL and ADSL modem equipped router models, as well as the dedicated Vigor 130 and Vigor 166 modems.