RedThunder RT84 Retro Typewriter Keyboard, UK Layout, Bluetooth 5.0 Wireless Mechanical Keyboard, Multi Devices Connection for PC/MAC/Laptop/Tablet/Phone

Product Information

Please connect your radio and computer, Turn on your radio, choose the correct communication port(the communication port need to maintain consistency with your computer) ; Buttons Definitions: RT84 has 3 side button, and the P1 P2 on keyboard you can setting as you need. Read from radio, you can see the factory settings of RT84 software. Then we will have a detailed Software Introduction of RT84. RT84 software:

Downloads

If you see there is a Yellow exclamation point, it means the driver was not installed successfully. Channel information: You can add at most 3000 channels here, and change the channel mode(digital/analog), Also you can set the TX frequency and RX frequency, Emergency and others. You can import & export the channels information here! Zone information: You can add 250 zones, then put the channels into the zones, you can find your need channel more convenient; VFO mode: RT84 has the VFO mode, you can Establish temporary channel in keyboard, no need the PC and programming cable.It is a entry-level amateur hams radio.It have more than 16 soft keyboards, support not only on pc programming, but also by manually. RT84 is our new arrival. We know RT84 is a dual band DMR radio, so many more functions we need to program by RT84 software. If you update drive successful, It will have a hint to show you have update the driver successful as the picture as below. If you find your RT84 can’t program, please don’t worry, today we will give you a method to solve the problem when you program your radio. Press the top sidekey and PTT together, turn on the radio at the same time. we will see that the led is flashing red and green. It means the RT84 is in DFU mode.

RedThunder K84 Mechanical Gaming Keyboard, 75% Ultra-Compact RedThunder K84 Mechanical Gaming Keyboard, 75% Ultra-Compact

Because of the Full function, low price, RT84 is very popular around the hams. Do you have problem when your RT84 programming? RT84 is a Dual Band DMR Radio, frequency is UHF400-480 Mhz and VHF 136-174 Mhz, and it has Direct Mode/Dual Capacity Direct Mode (DCDM).

Recently Posts

Secondly:Choose the VFO A or VFO B in the mode you want to programme,Normally we set VFO A to digital mode and VFO B to analog mode.