276°
Posted 20 hours ago

Perixx PERIBOARD-409P Wired PS2 Mini Keyboard, Black, UK Layout

£9.995£19.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

There is actually no technical reason that either port could not work with either type of device, if appropriate software was written to support that arrangement. ResendIterations [REG_DWORD] – Specifies the maximum number of times a hardware operation is attempted. If the number of trials exceeds the value of this entry, Windows considers the operation to have failed.

There is no standard for "key codes" - it's something you have to make up or invent for your OS. I personally like the idea of having an 8-bit key code where the highest 3 bits determine which row on the keyboard and the lowest 5 bits determine which column (essentially, the keyboard is treated as a grid of up to 8 rows and up to 32 columns of keys). Regardless of what you choose to use for your key codes, it should be something that is used by all keyboard drivers (including USB Keyboards) and could possibly also be used for other input devices (e.g. left mouse button might be treated as "key code 0xF1"). Yes. When you connect an external USB keyboard to a laptop, it acts as a second keyboard, and both keyboards could be used at the same time. What if my keyboard has two USB cables? In a standard implementation both PS/2 ports are usually controlled by a single microcontroller on the motherboard. This makes design and manufacturing extremely simple and cheap. However, a rare side effect of this design is that a malfunctioning device can cause the controller to become confused, resulting in both devices acting erratically. (A well designed and programmed controller will not behave in this way.) The resulting problems can be difficult to troubleshoot (e.g., a bad mouse can cause problems that appear to be the fault of the keyboard and vice versa). Modern keyboards should support all three scan code sets, however some don't. Scan code set 2 (the default) is the only scan code set that is guaranteed to be supported. In theory (I haven't tried it) it should be possible to attempt to set scan code set 1 or scan code set 3, and then ask the keyboard which scan code it is currently using and see if it actually is using the requested scan code set. In this way it may be possible to determine which scan code sets the keyboard does support.If you have a laptop computer, an external keyboard can also connect to one of the USB ports. If no USB ports are available, a USB hub would be needed. PS/2 keyboard interface playlist - A video playlist of building a PS/2 keyboard interface on bread boards, by Ben Eater.

PollingIterationsMaximum [REG_DWORD] – Specifies the maximum number of times Windows 2000 polls the hardware on older-style AT keyboards. If the number of trials specified in this entry is exceeded, Windows stops polling. The keyboard needs to work out of the box in almost all situations, because without a working keyboard it's rather hard to complete the installation of an operating syste or to fix the problem of not having a working keyboard. This applies both when the firmware/bios is in control of the hardware, and after the operating system takes over control of the hardware. The same applies to some extent without a working mouse, but if you know what you are doing it was usually easier to deal with a keyboard and no mouse than a mouse and no keyboard. Most monitors don't have any ports or places to connect (insert) a keyboard, so you usually connect a keyboard to the computer (tower). If your monitor has USB ports and a USB cable going from the monitor to the computer, a keyboard can connect to the monitor. If you have an All-in-One computer, the keyboard connects to it, which some may mistake as the monitor. Can I plug any keyboard into my computer? Theoretically, USB suffers from performance problems when many devices are connected to the computer simultaneously. For example, when a printer, scanner, and webcam simultaneously place data transfer demands on USB, those devices are forced to share the available bandwidth. This can lead to errors. SampleRate [REG_DWORD] – Specifies how often the PS/2 driver measures the characteristics and activities of the PS/2 mouse. The driver uses the information gathered through sampling to optimize the operation of the mouse device.Step 3:- Now, you will land at your destination i.e., Device Manager. Locate Keyboards and expand the category. N- key rollover is where you press a variable number of keys simultaneously, and the keyboard is able to register them. From a purely technical standpoint, this only works with PS/2 keyboards.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment