Gin Wheel 125mm with a Hook Scaffolding Pulley Block Lifting Crane

Product Information

When choosing a builders hoist the main features to consider are the height of lift required, the speed of lift required, supply electric voltage 230v/110v 1Ph, 415v, reach of the scaffold arm, scaffold fixings. Always pin in place with spring rivets or span pins. Unit features safety rail studs to attach safety rails, as it takes the place of a safety pole. Have a friendly, informative conversation with one of the Lifting Gear Direct specialists when you call 01384 76961 or get in touch online for more product details, quotes and advice.

Our builders hoists come in different safe working loads up to 500kg though most of the options available are up to 250kg, the reason being that generally the scaffold will be put under a great deal of stress and subjected to massive turning moments when larger load are lifted. The braking action is compulsory: and " shall be automatic when the operating force ceases, for the whole range of loads specified , whether the motion is lifting or lowering." (5.2.9)

Beam Hoists

All our hoists are CE certified though it is the responsibility of the user to ensure suitability of the scaffolding or support structure. The test loads are clearly specified by the Standard (400% of rated load for breakage test on sample, 150% for static test on each single unit). Securpulley conforms to these test requirements. It’s swing arm can pivot a full 360 degrees. Max capacity 100 lb. Throw of the arm is approximately 19 inches. Diameter of the pulley wheel is 13 inches. Securpulley is the only pulley for building industry that conforms to the Safety requirements of the Machinery Directive ECC 89/392, as witnessed by the 'CE' mark. Safety Regulations: an important and valuable base The brand Securpulley is supplied by the parent company Tornomeccanica located in Genova, Italy. Founded in the early 1970s, it's a prestigious company supplying items for many industries including Plant Engineering. Automobile Industry. Bolt/Nuts, Submarine, and the Building Industry.

A more recent design development, the scaffold crane runway system could prove to be essential in big A gin wheel is an ideal piece of lifting equipment for lifting lightweight loads to a higher area, such as the top of a scaffold tower, they consist of a single wheel over which a rope of any lengthcan bepulled and will lift the load attached to one end vertically to where it is required.Our Gantry hoists use a scaffold hoist to lift the load and are available at 300kg and 500kg capacity. Gantrys are free standing and not connected to the scaffolding, the arm/hoist will still cantilever over the edge of the working area though this us supported by counter weights/ballast weights This unit is for material use only. Never lift personnel with it. Always barricade directly over area where materials are being hoisted. During the design phase of the Securpulley Tornomeccanica followed the general safety requirements of the Machinery Directive (lifting machine shall not allow the loads to freely fall when the operator's action ceases) and the more detailed requirements of the European Standard prEN 13157 (Cranes safety - hand operated lifting devices).

A scaffold hoist is a piece of lifting equipment which generally uses a small swing jib arm that cantilevers out from the scaffolding, the load is then lifted and the arm then rotated and the load placed on the working platform. These drafts, even though they are presently only a reference, nevertheless contain some concepts and definitions that proved very useful not only for the design but also to declare that Securpulley is in all respects a manually operated lifting machine.

Scaffolding Hoist Arm Assemblies at ScaffoldMart