LICHIFIT Gearshift Mount Shifter Support LHD TH8A Bracket for Playseat Challenge Chair for Logitech G25 G27 G29 G920

Product Information

I got the rubber sheet (To wrap around the frame to protect it) from work and also changed to nuts to nyloc. For some reason, every time I make a change to this design, I need to execute the Combine-Cut functions again for the part<>Screw_Hole_Tools before exporting to STL. I'm not sure why, but the countersink holes always disappear on me. Can hopefully be printed on printers with a smaller build volume. If it were a one-piece assembly, it would not fit on the print bed of my Qidi Tech 1. In 2 pieces, it fits with plenty of extra space. I could make the shifter surface a good deal larger. This was designed to be assembled with either M3 screws with 5.5mm nuts, or M4 screws and no nuts. I did not try this with M4 screws as I have a lot of M3's around used for quadcopters.

ACCESSORIES - LOWDOWN SHIFTER ACCESSORIES - LOWDOWN SHIFTER

In combining two parts of the material via lamination, we create one 6mm desirable interface with various supreme finishes.Built by adhesion & high pressure in to a Tri-layer sheet material. Aluminium on both external surfaces with a hardened compressed ABS plastic core. Creating a product that is very light, extremely strong, durable & rigid. I've confirmed that this works fine with the Thrustmaster TH8A shifter using the provided clamp. It's secure enough, and positioned well enough, that I'm not going to bother making and reprinting a hard-mount plate for it. Much better shifter than the G27/G29/G920 variants by the way. The surface is not wide enough to use the rear clamps effectively, but you will want to use the front screw clamp. I tried to reduce the material requirement for the surface by minimizing the size where possible.