Habistat Pulse Proportional Stat 600W White

Product Information

Will provide optimal or precise temperatures closest to setpoints you have on your terrarium or enclosure for other small pets. Keeping the right temperature is vital to most reptiles and amphibians, i.e., excessive may make them overheat while cold ones will make them suffer from hypothermia, be inactive, affect eating habits and health, you need to be able to regulate it accurately. The water-resistant probe comes with an extended code (6 feet), making it ideal even for larger terrariums. If your tank needs a certain humidity, you may also need a hygrometer, and there are some which combine everything all in one item. This does, however, mean there is more to go wrong as opposed to keeping it separate. Types Of Reptile Thermostat

One significant advantage of the pulsing thermostat is that its reaction to temperature change is faster, making them very efficient in maintaining it at desired setpoints. 3. Reptile dimming thermostats Place the probe at an appropriate location, depending on the type of reptile thermostat you chose. The ON/OFF works well with the sensor on the surface for effective control with the others can be either at a central location or other areas depending on how many heaters you are using. However, it shouldn’t touch your pet, and it should be on a direct line of sight with the heat source to avoid wrong readings. I have turned the heat up on the thermostat to test if it would project, I turned it up by quite a few degrees yet still feels cold/the same temp as before.What you can do as a test, and only do so whilst in attendance, is remove the animal from the vivarium, and place him somewhere warm. Unplug the heater from the thermostat and plug it straight into the mains. Close the viv for a few minutes and then open it and see if you notice the heat. If it hits you as you slide open the glass then you know the heater is capable of providing an adequate level of heat. Naturally unplug the heater straight away to prevent any fires. Mat Stat Thermostats are not suitable for Heat Bulbs or Fans or Ceramic Heaters but are ideal for Heat Mats, Reptile Radiators and Reptile Heat Cables rated up to a Max load of 300W.

Every thermostat will have a maximum power wattage that they can connect to, so you really need to ensure that your bulb or heater is compatible. If it is too powerful for the thermostat, it could mean your setup is compromised and one or the other will either stop working or become overpowered.They are the latest technologically with more capability and can run as on/off, pulsing, pulse, or dimming thermostats. Furthermore, they give you a great way to control temperature, such as the Microclimate EVO. Choosing a thermostat for your vivarium

You can control it via a smartphone using the free InkbirdSmart Android or iOS app once you connect the device and your phone to the same network device. If a different bulb works in the vivarium holder then you’re sorted. You’ve found the problem and you can stop looking. Old bulb doesn’t work in new holder but new bulb also doesn’t work It is one of the reptile thermostats with multiple probes with 10 feet sensor cables and replaceable 6 feet power code.A normal thermostat switches a heater on full power until the set temperature is achieved. It then switches the heater off completely until the temperature drops below the set value, when the cycle starts over again. Someone told me to test the thermostat with a lamp and to put ice cubes under the censor and then something hot under the censor to make sure it was working correctly, it is!