CMT DET-004 Banding Iron, 230 V, Black

Product Information

The types of edge banding applied with hot-melt glue are cheap types you can find in every DIY store. They’re made from any material with low heat resistance, so it’s best to avoid using them on materials like MDF or plywood if your project is exposed to high temperatures (like outdoor furniture). There you have it! Now you know how to finish plywood edges using edge banding! The key to lasting results is to make sure that there’s no edge banding extending past the plywood edge and that everything is fully ironed down. Basically, there are two types of edge banding available for plywood edges. Hardwood banding and iron-on banding. Each type of banding has its own advantages and disadvantages. There are several types of iron-on banding available to suit the various needs of different projects. A solid wood finish is the most popular example, giving the look and feel of real wood without the expense.

Edge Banding - Pine and Poplar How to Finish Plywood Edges Using Edge Banding - Pine and Poplar

Go over your edge banding with the iron one more time. Make sure that every little inch of your edge banding is ironed down and adhered to the plywood edge. Edge Banding applied with iron can be used on any type of material with low heat resistance. They’re the cheapest types, so they’re perfect for residential projects – you just need a household iron to attach them! It’s a easy process and can do it with simple guidance. Applying it to a curved corner is more difficult because it needs more precise measurements to fit the curve perfectly. You will need a corner roller, or you can use your fingers if you are careful enough. Using iron-on those corners is very tough. Don’t worry, and there is a solution for this too.If you need to apply edge banding to a curved surface, you can–it just might take a little more maneuvering. Place your plywood slightly off the edge of a table so that the excess edge banding on the side is facing up.

Edge banding iron DET-004 | Systems and accessories | CMT

First of all, take your edge banding and cut it according to your project dimensions. After cutting, make sure that both ends are straight so that they perfectly fit into each other without any gap or gaps between them. After you’ve done this, use a straight edge to make sure that the edges are flush with each other.It heats up in 45 seconds on the highest setting, making it a must-have for those with time constraints.