TIME-SERT M6x1.0 Thread Repair kit #1610

Product Information

Example. The blind hole depth for a 5/16-18x.450 should be a minimum of .700 inches or 17.8mm deep. Customers have found in their own testing data that TIME-SERT’s have exceeded their expectations. Many of our larger customers will test TIME-SERT’s before placing them in critical applications and find excellent results.

Yes, if the threads in the base material are not damaged a new TIME-SERT can be re-inserted into that hole. This is a common practice on CNC pallet changers. When an insert starts to show wear over time, the insert can be removed with a screw extractor then replaced with a new one. S.T.I stands for "Screw Thread Insert" an example would be a TIME-SERT M8x1.25 repair kit would require a M8x1.25 S.T.I tap, this is "larger" than a standard M8x1.25. TIME-SERT® Positive Placement. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole.expressly retains the right to make changes or discontinue any product it manufactures or sells at any time and without notice. Why does the installation of a Time-Sert require the use of an STI tap? What is an STI tap? Can a standard tap be used instead? What is happening is the plating is slightly heaver on some inserts that is why it will feel tighter when screwing inserts on driver tool by hand. This simplifies installation and produces a strong, permanent repair by allowing the full torque of the fastener to be applied to the repaired threads. If multiple inserts need to be installed this can also be done using a CNC with a tapmatic reversing head.

The insert is provided with a built-in flange that automatically positions its depth during installation. Why does the NorthStar2000 p/n J-42385-2000 and the NorthStar BIG-SERT p/n J-42385-500BS have 2 lines on the tooling? When the NorthStar J-423385-500 kit only has one.Tests in the laboratory have shown that the Time-Sert repairs are equivalent to the original threads in most cases. What type of spark plug do you have? Washer seat or Taper seat. Washer seat sparkplug's will have a washer to seal the spark plug against the head. Taper seat spark plugs will have a taper to seal against the head.

A TIME-SERT is a solid-body thread insert offered by Time Fastener Company. Some of the features that make TIME-SERT a good choice for many stripped or damaged thread repair applications include...TIME-SERTs can be removed with a spiral point screw extractor, or drilled out with the drill that came in the repair kit. TIME-SERT® is a solid bushing insert. This guarantees easy installation and allows for full load use of tapped hole, ensuring protection against stress and vibration. Any claims for Discrepancies in shipment must be made within one week of receipt of merchandise or no credit will be issued. No, you cannot repair a helicoil with a TIME-SERT because the are too close in size. We can offer a larger diameter insert called BIG-SERT Link: BIG-SERT