Clearwater CH0005 PH Plus Increaser for Swimming Pool and Spa Treatment

Product Information

Both soda ash and baking soda are used to restore balance, but one isn’t always better than the other. Why Use Soda Ash In A Pool? Baking soda’s pH level is 8.3, significantly lower than soda ash. This means you’ll have to use a lot more baking soda to raise the pH level, but the TA will be less affected. Bestway ClearWater 1kg pH Plus is the best way (boom, boom) to avoid itchy eyes and skin because swimming pool pH levels have dropped below the recommended level. To avoid a dreaded dose of red eye it's vital that acidity is controlled and pH Plus is a simple and highly effective way to achieve this. As a general guide, suitable dosage levels for hot tubs and pools sit at around 450 grams per 10,000 gallons of pool water. The amount of pH increaser or decreaser you need to add to your hot tub depends on the volume of water and how low your readings are. Refer to the dosage information will be printed on the individual chemical bottles.

Fi-Clor pH Raiser - Fi-Clor chemicals - Spa Pool chemicals

Soda ash (sodium carbonate) is a highly alkaline substance with a pH level between 11.3 and 11.7 – making it an ideal substance for raising the pool’s pH and total alkalinity.When you’re ready to begin mixing your chemicals, you should handle them with chemical resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. It is also advised to wear tightly sealed goggles and appropriate protective clothing such as long sleeves, trousers, and closed-toed shoes that fully protect your feet from spills. You should also wash your hands after handling chemicals. Around 60% of UK households are in hard or very hard water areas. To avoid scale build-up (which can impact water quality and pump components) use a weekly dose of ClearWater Scale & Stain Controller.

pH Increaser | Increase pH In Pool | pH Increaser For Hot

Baking soda (sodium bicarbonate) is also an alkaline substance, but with a lower pH level of 8 – commonly used to increase pH and total alkalinity. In fact, most pH Increaser products are just baking soda in a fancy bottle! Our pH increaser is entirely sodium carbonate, making it a highly effective water balancing solution.

Safety Data Sheet (SDS)

Outdoor storage areas for your hot tub chemicals should be situated away from anything flammable. Keep any petrol-powered equipment, like your lawnmower, in a different location. The storage area should also be away from sources of heat, like an outdoor fire pit or BBQ. Allow sunlight exposure: Sunlight can help to break down and dissipate pool chemicals, which may contribute to a slight increase in pH over time. Make sure your pool gets adequate sunlight, but keep in mind that this method may not be sufficient to achieve significant changes in pH levels. Skin irritation: The hot tub water becomes very acidic when the alkali levels are low. Anyone soaking in the tub will find this very irritating for their skin, nasal passages, and eyes. It could even lead to respiratory distress.