About this deal
Which? are an Introducer Appointer Representative of Optimise Media Limited (FRN 313408), for the introduction of HSBC Group, who are authorised and regulated by the Financial Conduct Authority to provide credit brokering activity. Optimise Media is registered in England and Wales to Exchange Street Buildings, 35-37 Exchange Street, Norwich, England, NR2 1DP and company number 04455319. Which? Limited is registered in England and Wales to 2 Marylebone Road, London NW1 4DF, company number 00677665 and is an Introducer Appointed Representative of the following: We tested the Halfords 110W Polisher on medium and deep scratches with three compatible car scratch removers. Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’). If You Are Inexperienced With Repairs: You need some idea of what you are doing, as a simple mistake like using the wrong type of cloth, or using one that had accidentally fallen to the ground, can cause more harm than good. Furthermore, knowing when to stop rubbing the T-Cut on the scratch is essential, as overdoing it after the scratch is removed, could result in you revealing the metal beneath the paint.
Of course, no matter how it may not be ideal for deeper scratches, T-Cut is great for that top layer. To apply T-Cut, it is a very simple process. Paint on cars has a few layers including a transparent one over the top that’s called the clearcoat. This is what is actually getting scratched unless it’s a very deep scar, so you can use one of these products to smooth the clear layer and repair the scratch. Then we set about applying a set of scratches of a measured, even depth to a new car door using a specialist piece of scratch equipment. Applications needed With most deep scratches, you'll see a line that's a different colour to your car. That's the primer or metal showing through, depending on the depth of the scratch.It’s vital that all excess fluid is removed before finishing the job. If too much is left on, or the incorrect colour has been applied to scratches, it can be extremely difficult to remove. Applying T-Cut is a time-consuming process and requires additional care afterwards. If the application of T-Cut is rushed then it can lead to more expensive repairs later on down the line. Common Questions Is T-Cut safe? The car scratch remover is applied with a microfibre cloth following the manufacturer's instructions. As mentioned a couple of times through this article – there are several times where T-Cut is not the right solution. If tcut is not right for you, if the scratches are too deep or if you want expert guidance when fixing scratches to avoid any accidental damage, then this is where ChipsAway come in. Provided you haven’t removed the colour, however, the products on this list are budget-friendly enough to try before you bring in the costly professionals. Is it worth fixing scratches on my car? T-Cut Metallic –Designed specifically to restore the colour and lustre of metallic and pearlescent car paintwork.
If You Rush It Or Don’t Have Time For The Maintenance: As mentioned in step 4, you should always remove any excess product on the car, as it will be tough to remove any that was left over. div>