EVAPO-RUST® C700 Rust Remover, 946 ml

Product Information

You don't have permission to access "http://www.tractorsupply.com/tsc/product/evapo-rust-super-safe-rust-remover" on this server. Cleaning the metal item involves rinsing. However, interestingly enough, you can go about it in two different ways. Rinsing with Water The product can be re-used until its effectiveness starts to wear off. In general, one gallon of Evapo-Rust® will remove 1/2 pound of pure dry rust. Since rust is 1/17th the weight of iron, the workload is quite substantial.

Try a little ceramic heater close to the part as I have done this on parts that do not move and it worked. The metal will expand, but the gunk will not. While the part is very warm try to move it, and once it moves then clean the parts that are hard to get to. In this conversation, David talks about his discovery of the solvent and other products that he has created along the way. it's fully earth-friendly and doesn't cause any harm to nature, groundwater, living organisms or whatever; Items that are obviously damaged should be returned to base for inspection, report and rectification. With the help of sponge or some soft cloth put the liquid onto the rusting spot - don't take too much of Evapo. After that wait for ten-twenty seconds and wash it with water and another sponge.Evaporust is the only thing I use to strip and clean rust on my antique tools. It leaves the jappaning completely intact while getting rid of the heaviest rust. Definitely an 11 out of 10. Stephen Ellis The removal of the rust (iron oxide) reduces the proportion of iron to carbon, leaving a higher concentration of carbon on the outer surface. This heavier layer of carbon could cause a darkening of the metal due to the attributes of the carbon. The darkening does not have an adverse affect on the metal. It merely represents the movement of carbon from the interior of the metal to the exterior of the metal.

On the other hand, there are some DIY solutions, like electrolysis and a vinegar-salt combination that seem to get the job done right. Of course, there are other methods that have been proven as myths, such as the Coca-Cola rust removal method. Personally, I’d advise using the vinegar-salt combo if you’re strapped for cash or simply can’t find Evapo-Rust anywhere. It’s by far the cheapest method, but it will take some time to work effectively. Evapo-Rust™ is a revolutionary new product that removes rust in a safe, easy to use, and environmentally friendly manner. It is safe for the user and non-corrosive to steel. It does not harm brass, copper, aluminum, gold, lead, titanium, steel, cast iron, chrome solder points, vinyl, plastic, rubber, silicone, glass, cork, or wood. EVAPO-RUST® can be used over and over until it absolutely stops working. On average, one gallon de-rusts up to 300 pounds of light to moderately rusted steel.If you've ever tried removing rust from any metal parts, you won't say it's quite easy. Usually it takes lots of time and really huge amounts of money. But with up-to-date materials you can really make it easily. With Evapo liquid you only need to put the metal part in the liquid or just to moisturize metal with it. After using this thing you'll get the results in the shortest time. The producer says you'll actually get next results and wonderful possibilities:

The wire brush was hard to get into the annular ring gear, but the rust is loose there. Notice how clear and readable the letting is.Evapo-Rust is a soak remover. In other words, it works by submerging a rusty item into it and letting it sit there for a while. It’s similar to other powerful soak rust removers, like muriatic acid. Evapo-Rust, an incredibly potent rust remover that everyone can’t seem to stop praising. In fact, the list of Evapo-Rust users is pretty large. It includes such high-profile clients like the U.S. Army, NATO, and the FBI. Based on extensive research and years of development, this product has been proven effective to remove even deep rust on all types of mild steel and iron. Earlier, I mentioned how important it was that Evapo-Rust has to completely cover the rusted item. And I do agree with that, to an extent. When the item is completely under the surface, the product can react equally on all sides. So, if you have enough of Evapo-Rust, feel free to pour as much as you need. Next, you’ll need some goggles and a pair of rubber gloves. Evapo-Rust is water-based, so doesn’t harm the skin, nor is it toxic. However, I still recommend using gloves and glasses, since it can splash into your eyes when you’re submerging the metal. Step 1: Pour Enough Evapo-Rust In

Depending on the metal and the severity of the rust and the required level of de-rusting it can take anywhere from 12 hours up to as long as 1 week (or more) for the chemical reaction to finish Most people would discard used rust remover, and doing that with Evapo-Rust is easy; it’s biodegradable and non-toxic, so you won’t be harming the environment. However, don’t throw away the used Evapo-Rust. It can be reusable, so I advise keeping it in a separate container (more on that later). Step 5: Clean the Item David: When we developed the product, there really wasn’t anything out there like it. A large part of our consumer base is industrial–they use it to clean the parts of their machines. We’ve also sold it retail since 2006 because there was such high demand by small farmers. It’s the very best way we could advertise the product–word of mouth. That’s why, from the very beginning we’ve just handed out samples for people to see the results for themselves. Retail is about 75 percent of our business at this point.

Customer Support

Evapo-Rust is an amazing rust remover, but it’s also a part of an entire range of high-quality products. I had the honor of testing a few myself and the results were positive across the board. Evapo-Rust Gel If you have problems removing rust from certain metal objects, I’m sure you’ve had many people give you different suggestions. Some would share their homemade rust remover “ recipe” while others would praise a product or two. Then again, you’ve surely browsed the web for a solution and maybe even found videos talking about water-based rust removers and how spectacular they are. And one of the best, highest-rated water-based rust removers out there is Evapo-Rust. After all procedures are done, take microfiber cloth and dry the place until it's not wet anymore. The only thing which is left is to put the new paint layer on the spot and you can do it immediately. A product of extensive research, EVAPO-RUST® rust remover is an environmentally safe water-based product that removes rust without the need for scrubbing. It's easy to use and anyone can restore their rusted tools, auto parts, even firearms to like-new condition.