Joined in 2023 
82 
63 About this deal
Actuation Test / Bidirectory Test is used to access vehicle-specific subsystem and component tests. its updated 3 times allready getting any extra features cam as v11.3, then updated to v11.45, now at v11.5, due another update any time Evap System Test| The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test. Range Rover Sport Autobiography Supercharged, Fuji White, 110K, Mods: Upgraded Pulleys (Crank and SC snout), Magnaflow Exhaust, Tune by Frank Smith
iCarsoft Multi-System Diagnostic Tool LR V3.0 For Land Rover iCarsoft Multi-System Diagnostic Tool LR V3.0 For Land Rover
Onboard Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems. I still have not figured out what is killing the battery in my S-type. So the car is parked with the battery disconnected. Now I'm having The LR1.0 is the basic unit to service Land Rover and Jaguars exclusively. The LR2.0 and 3.0 are upgrades that cover everything the 1.0 does plus numerous other systems. iCarSoft offer a large line of scanners for every budget. If you only need to service your Jag. Then the LR3.0 should be all you need. Unless you have other brands to service. There would be no reason to get into the CR lineup. What users like about the LR3.0, is I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.Electronic Parking Brake (EPB) System Maintenance : Deactivate and reactivate the EPB system during replacement or initialization. I bought a ICarSoft LR V3.0 which says it can calibrate the ride height sensors but I can’t figure out how in the settings. Is the compressor not coming on because of the red hard fault or is it that the sensors need calibrated for it to work? With fuse 27 pulled a cheap EOBD scanner can still connect to the car, but the JLR specific LR V3.0 cannot!
iCarsoft LR V3.0 for Land Rover - FULL System Diagnostic Scan
Transmission Adaption (TCM) : Reset adaptation values and adjust oil levels in transmission modules. The Jaguar F-TYPE is the definitive Jaguar sports car from a rich bloodline spanning 75 years and including some of the most iconic models ever built TCM (Trans adaption).This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.Air Suspension| Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off I bought a ICarSoft LR V3.0 which says it can calibrate the ride height sensors but I can’t figure out how in the settings. Is the compressor not coming on because of the red hard fault or is it that the sensors need calibrated for it to work? Searched in various sources, even in various essays on https://samplius.com/free-essay-examples/science/ where this occurs sometimes.
iCarsoft Technology Inc. iCarsoft Technology Inc.
iCarsoft LR V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM. Seeing how I have had some of the same connection issues with this CRpro. I don't expect it to act any differently.all been a success. Working around this connection problem is not what I had expected. Just another obstacle. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
iCarsoft LR V3.0 for LandRover/Jaguar
My suspicion is that it actually depends on the car. A lot of these cheaper tools seem to have the best support for newer cars only on the latest version (obviously) but also what sometimes happens is that features for older cars actually disappear, and so on an older car like the X350 sometimes the older model is actually better. But that's just a guess. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts. Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.issues. At first, having the XJ6 was fine and working on it was more of a hobby. Now I have six in my driveway and it's more like a full Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the onboard computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault. Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve. to move on to another brand. I just can't keep using all my spare time to flesh out all these minor failure that cause these catastrophic I understand that SDD is probably the way to go for anything really advanced, but sometime one just wants to pull something simple out of the boot, plugin and go, for example if you are a long way from home and that laptop.
Great Deal 
New Comment