ATN X-SIGHT 4K PRO 3-14X Smart Ultra HD Day & Night Vision Rifle Scope

Product Information

Allows you to connect to ATN Smart accessories, that use Bluetooth, to communicate with your scope. To remove the microSD Card from the port, push the card slightly in using the same thin object you did before. When the card pops up a few millimeters, pull the card out with your fingers or tweezers. When a shot is fired and your scope experiences recoil (some airguns may not provide enough recoil for RAV to be activated). The scope will record video prior to the shot being taken, the moment of, and some time after. Exact settings may be adjusted in the System Settings. Recoil Activated Video

Each subsequent measurement of the distance to the target, plus when transferring it to the “ATN RADAR” application will update the data and location of the previous Pin. Also, make sure you see the RAV icon on the Home screen upper left corner. Press the RIGHT button again to stop Video recording. Although you may not need more then one shot to Zero in your scope, we do recommend that you repeat the process several times to make sure that you truly are Zeroed in. As you gain experience in Zeroing in your scope it should take you no time at all to Zero it. If you are going to record video, the microSD Card should be a Class 10 (10 Mb/sec) or faster and have capacity from 4 to 64 Gb that is an HC type SD card.If the device does not restart within 30 seconds, press and hold the power button for 15 seconds and the scope will turn off. If the scope freezes or stops responding to the control panel. Press and hold the Power button for 15 seconds to reboot the scope. To enter the System Settings, open the Shortcut Carousel by pressing the OK button and selecting the wrench icon with RIGHT or LEFT buttons .

Get in tune with the environment to ensure you make that shot. For example: Relative Humidity 85% Wind Speed 12 mph Wind Direction -45° Temperature 59°F Barometric Pressure 29.92 hg Altitude 1800 ft We have included a USB (type C) charging cable with your scope. Plug the cable into a USB wall charger that has an output of 2 amps (Wall Charger not included). Having previously removed the Allen screw that covers the visible red laser, you can now move the ABL reticle to the correct area of the display to align the reticle with the infrared ranging laser. The visible red laser is used as a visual reference point for zeroing. Use the arrow keys on the keypad to move the reticle to the correct position. With the X-Sight zeroing in is achieved by firing a round (or multiple rounds). You then line-up the crosshairs onto the fired shot(s) using your controls, while keeping your original sighted line.Smart range finder. Take two easy readings of your target and the scope will not only range in on your prey but adjust your reticle's point of impact instantaneously.