Mechanical Keyboard Switch Puller Remover Tool for Cherry/Kailh/Gateron Switches Replace

Product Information

However, choosing the right tool is incredibly important since it can speed up the whole process and prevent scratches or damages. And also, take this opportunity to do any modification (lubing, filming, spring swap, housing swap, etc.

Compared to a traditional switch puller, the Gateron switch puller is easier to use and makes removing keyboard switches nice and easy. Mechanical keyboard switches are composed of a plastic stem attached to the keycap, held by a spring, and pressed down. Keychron will rectify the defect by, at our choice, either repairing the defective product or replacing it with a product of same or similar type and condition.This is because the switches must be installed in the correct orientation, otherwise the pins won’t go into the sockets. If you’ve got the Corsair K70 Pro Mini Wireless, you’re in luck, as it comes with a switch and keycap puller in the box, so you’re ready to go.

Cherry’s MX Switch series is the most famous mechanical keyboard switch and became the standard of mechanical keyboards. Some mechanical keyboards have switches that are soldered to the PCB, and what that means is that you must desolder the switches first before you can remove them. It is a product that can be removed by simply putting the Gateron Switch Puller on the switch and pulling it out. Using the switch puller that came with the K70 Pro Mini as an example, press the tool down onto the key until both arms slide down the sides of the keycap and hook underneath the edges of the cap.Before you dive into swapping out your switches, remember one thing: Not every mechanical keyboard has switches that you can easily swap out. If you attempt to pull out switches from a solder-only keyboard, you will break your switches and potentially even your PCB. Unless otherwise explicitly stated in documents provided in connection with the purchase, the warranty period is twelve (12) months.