Leather dye Black for Sofas, Shoes, Handbags, Car Seats, Jackets |Leather dye colourant kit. Hard Wearing Scuff and Scratch Resistant for Leather Vinyl. Built in Sealer Restores Worn Leather.

Product Information

Wait 30 minutes for the Colourant to thoroughly dry and then proceed to spray the Colourant onto the leather. Set up your spray gun or airbrush and then spray the leather at a comfortable distance, being careful not to over apply the colour. It is best to practice a bit on a piece of paper to get the hang of spraying first. Spray the Colourant on in thin layers. This avoids runs and so makes for a nicer finish. Also read: How to Restore Your Old Leather Item with a Repair Kit? How should you darken leather naturally? There are two ways in which the walnut hull solution may be used to darken the leather item. Through applying it over the leather surface, you may either soak the leather in the solvent or add it;

Because the Colourant we're using is water based it takes a few minutes to dry. We therefore advise you to spray one area and then dry it using a hair dryer. Doing it this way reduces the chance of runs. If you do see a run, just dab it off with a cloth or sponge and then re-spray the area. To apply it, simply use a sponge or spray to apply thin coats, drying in between each one. The hair dryer is key here, because otherwise you would have to wait a few hours between each coat before you could spray or gently wipe another layer of sealant on to the leather, and it would just take too long. Wherever you buy leather dye, a leather finisher can be also a good investment. It may even be considered a top coat. For a more matte/satin finish, select a glossy finish product. How to make a homemade leather dye? Leather Colourant Kit – Often referred to as a Leather Dye Kit, but it does not actually dye the leather. Instead, it removes the old coatings applied in the tannery and allows you to restore the leather to the original colour or change the colour completely.The first step was to prep (remove/reduce) the original coating on the leather. In this step we are re-applying that coating. You should apply as many coats of leather oil if you’re not pleased and would like the leather to look a bit darker; The reason we recommend matte finishes is because it allows the leather to be the star of the show, and after a re dye job, customers usually like it to be. With gloss or satin, the sheen and shine can often take away from the new color you have just dyed. Whilst many leather sofa dye and preparation products are needed, we have put them together in a kit specifically designed for dyeing and changing the colour of leather. All in one leather dye and sealant from The Leather Colour Doctor; Ideal for restoring tired looking leather sofas and car seats, or giving new life to dull and faded leather accessories. Dye can also be used to change the colour of leather products.

To give your leather bags, shoes and accessories a fresh or nice vintage look, you may want to darken them with natural dyes instead of commercial products. Two traditional forms, without dyes, to darken leather naturally are: You may use red onions as a homemade leather dye. Boil them to get a certain shade of blue. To get a brownish dye, use fresh walnuts. But keep in mind that natural dyes give subtle colors; Apply this as in the previous step, wiping off excess dye to enhance the two-tone effect. Bottle #5 - Leather Sealer Top Finish Here's a basic idea of what's involved, with a few tips on what to avoid. Don't Use Cheap Leather Dyes

After adding the first coat of oil, enable the leather to set and dry for approximately 10-12 hours or the whole night. Up to this point, the leather piece should become 2-3 shades darker than its original shade; This is a common error and it could spell disaster for your leather. At Leather Colour Doctor we have taken the time to carefully formulate dyes of exceptional quality. Our products act as an all-in-one leather dye and sealer.

Maybe your leather couch needs leather dye to restore it to its former glory, or maybe you're hoping to completely transform it - taking it from a lighter color to a dark color, or vice versa. Certified Leather Care Technician Expert Interview. 7 January 2021. Place a drop or two of dye on a wool dauber or sponge and spread it over the leather using parallel strokes, making sure to get all the nooks and crannies. A little bit of dye goes a long way, so don't use more than a few drops at a time, or the dye will drip and run down your furniture. [9] X Research source Below we'll talk you through the different methods out there, the best options for you, and tell you all about the different leather darkening processes and darkening leather items you'll need to darken leather and improve the surface of the leather fast. Fortunately, The Leather Colour Doctor has a range of professional-quality leather dyes that will restore your leather to like-new condition.

How The Leather Colour Doctor Can Help You

Leather Steering Wheel Restoration – Use this kit to restore leather steering wheels. Painting Leather With all that said, leather dyes often ram heads with leather paints. Both products are great but have varying capacities. Leather paint is perfect for creating intricate designs on leather. However, it often conceals the natural grain and texture of the material. On the other hand, dye is capable of penetrating leather. As such, you can alter the hue of the material without compromising its sought-after texture. Precautions to Take When Dying Leather Our leather dye is a concentrated, water-based colourant cream. The cream is easily applied and can be used to re-colour leather products or as a touch up dye for minor repairs. Our dye is easily applied with a sponge or spray bottle and leaves behind vivid, rich colour with a built-in protective sealant layer. Although our all in one dye and sealant offers built-in protection, we recommend finishing your project with our leather protection cream to provide additional protection against staining. Make sure you apply at a 45 degree angle and alternate directions each layer. This will limit light reflection and ensure an even finish. Some industrial leather dyes produce poisonous pigments and should be treated with great care. Often, they may be costly. In many cases, you may make a DIY leather dye, allowing you greater control over the color and the safety of the natural or fake leather.

Finally, sand it with a fine grit sandpaper (between 500 and 1000-grit). Bottle #3 - Leather Adhesion Promoter

Leather Dye Summary

Mix the regular rubbing alcohol and powdered mica pigment. The more pigments you add, the more intense color you get; Three coats are usually needed, and you should change the direction of the strokes by 45º with each coat as this helps to scatter the light reflection easily. You can use a hair dryer to speed up drying time between coats. Brew the vinegar with rusted steel wool. Just put the wool into a jar with boiling vinegar. Leave it for a few days. Mix it with any leather conditioner and apply to the leather surface; As a general guide, we suggest that 50ml is enough to cover small scuffs or to dye a leather wallet.