LED Dimmer Switch Gloss Brush Chrome 1500w 3 Gang 500w x 3 Screwless Plate Finish N357DME

Product Information

Any help would be appreciated. I'd rather ask before trying this. Clearly, I am not an electrician! If I were, then you definitely wouldn't want to hire me!! :). Carefully remove the wire nut from one of the disconnected wires and touch it to the hot terminal on the left switch - if the living room recessed lights come on, that was the LOAD wire - mark it with a bit of tape My problem is with the red load wire on the new switch. Do I remove the load wire from the leftmost switch and connect it to load on the new switch? Or do I have to actually connect a separate load line to my new switch red/load wire? our dimmer switches cannot be used in conjunction with each other. We recommend using one dimmer switch per circuit

LED dimmer module has auto-detect function for either leading edge or trailing edge with 5-150W load, 230-240V 50Hz If the living room recessed lights do not come on, touch the wire to the load terminal on the left switch - if the eyeball light comes on then that was the HOT wire In a multi-gang box, the confusion is also salvation. Studying where the wires go will tell you which side is line (always hot) and which is load. Any pair of wires with the same marked color are the two travelers in a 3-way circuit (there is no need to distinguish them from each other). The switch being replaced has two hot lines connected to it as you can see in my photo. Since I only need one hot wire to the new switch, what should I do with the 2nd hot wire that I remove from the switch I am replacing?

Similar products

Gold’s a great way to inject a bit of oomph into a room, and this brass LED dimmer switch does it perfectly. The brushed brass plate is gold-like in appearance, but it’s not too shiny so there’s no worry that it’ll hog the limelight. It’s all about subtlety. Then come the dimmer knobs with their beautiful knurled edges and sleek front. The knurling serves a practical purpose too – it makes the knobs really tactile and easy to turn. And because we couldn’t decide which colour knob to add (they all look bloomin’ great), we thought we’d let you choose, that way you can make sure it’s absolutely spot on for your interior style.

our dimmer switches have a soft start function that slowly brings the lights to the set level in about 1-2 seconds, prolonging the life of your bulbs First, don't disconnect anything except the 2 non-ground wires to that one switch you are working on. Lots of people disconnect too much, then get confused.

Just a note: The rightmost switch is a 3-way and is independent of this install and is not connected in any way to the lights which will be connected to the dimmer.