Joined in 2023 
82 
63 About this deal
If a probe is used, do not connect the ground lead to high voltage since it has isobaric electric potential as the ground.
The DP832A is a Triple Output 30V/3A & 30V/3A & 5V/3A Bench Linear DC Power Supply. Each model in the Rigol DP800 series of high-performance programmable linear DC power supplies is user-friendly, affordable and possesses multiple protection features. The DG832 is a 35MHz, 2CH Function Generator with a maximum sampling rate of 125MSa/s. The Rigol DG800 series offers a user-friendly and high-performance function/arbitrary waveform generator solution at a very attractive price. Each instrument provides many functions including; function generator, arbitrary waveform generator, noise source, pulse generator, harmonics generator, analogue / digital modulator and frequency counter. Any Rigol DG800 series function/arbitrary waveform generator would be a valuable asset in any home, business or education laboratory. Zur Vermeidung von Kurzschluß im Geräteinneren und Stromschlag betreiben Sie das Gerät bitte niemals in feuchter Umgebung. The function key at the front panel is denoted by the format of "Key Name (Bold) + Text Box" in the manual. For example, Utility denotes the "Utility" key. RESOLVED: This appears not to be a bug, but rather unclear/incorrect instructions regarding the calibration procedure causing SCPI commands to fail when attempting calibration. See this post for further details, and the Calibration section below.Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc). For the multi-channel model, the function of this part is channel selection and output switch. For the single-channel model, the function of this part is range selection and output switch. After DP800 installs the file, and the DP800 automatically reboots. Remove the USB Flash Drive with the .GEL file. Note: Connect the positive terminal of the test lead with the (+) terminal of the channel output and connect the negative terminal of the test lead with the (-) terminal of the channel output. I tried reinstalling Trigger in FW 08, but I got an 'invalid key' response. It worked in FW 06, so apparently there is an issue with the Trigger key, the Trigger option changing, or otherwise having been disabled in FW 08(?).
Rear Panel........................................................................................... Zur Vermeidung von Feuer oder Stromschlag, beachten Sie alle Bemerkungen und Markierungen auf dem Instrument. Befolgen Sie die Bedienungsanleitung für weitere Informationen, bevor Sie weitere Anschlüsse an das Instrument legen. Make sure that the AC power to be connected to the instrument fulfills the requirements in Table 1-2. Provide intelligent fan speed control function; judge and control the fan speed automatically according to the working condition to effectively reduce the fan noise The following features are standard on ‘DP8xxA’ models and optional on ‘DP8xx’ models: High resolution output control, online monitoring and analysis functions, 4-off trigger inputs/outputs, RS232 & LAN interfaces.I (only) lost the 'Trigger' Option, but everything else is Ok, including the fact that Calibration was NOT altered. So I call this a big success, with the loss of Trigger considered a secondary or worthy sacrifice for the other benefits. All other options are still OK! Please handle with care during transportation to avoid damage to keys, knob interfaces and other parts on the panels. Currently not believed to be resolved by any firmware update or hardware changes. To be safe, best practice is probably not to have anything connected to the power supply when you turn it on. Users can set the remote interface parameters, system parameters and print parameters. Besides, users can also calibrate the instrument, view system information, define the recall configuration of Preset and install options. inches TFT display. It is used to display the system parameter setting, system output state, menu items, prompt messages, etc.
The Firmware Installation Instructions are attached below: Although there is a serious flaw in the form of missing information. Change Step 4. as follows: --> Step 4. Power on the DP800 'and when you see the RIGOL logo (icon) press the Help key to place the unit into Upgrade Mode. This is indicated on the display.' Store and Recall................................................................................... I'm sorry if this has been asked before and I'm not sure if this is the proper sub-forum to ask in.If it's not, I apologize and maybe a moderator could move the post.I have a Rigol 832 Programmable Power Supply.It's been absolutely wonderful.I found the keygen a long time ago to upgrade the unit.One of the upgrade no longer works.I can't remember which one but I remember reading that if I upgraded the firmware, the one option would be removed.I wanted to know if that ever got fixed?I can try and find out what option it was that disabled by the firmware upgrade if needed.I can't seem to find the forum anymore with the keygen. I thought it was here on EEVBlog.Standard configuration interfaces: USB HOST, USB DEVICE, LAN (option), RS232 (option), Digital I/O (option), rear panel output interface (DP811)
Provide waveform display function to provide real-time and dynamic display of the output voltage/current waveform, clearly showing the output state and tendency of the instrument in together with the digital display of the voltage, current and power values Operate the instrument in an electrostatic discharge protective environment to avoid damage induced by static discharges. Always ground both the internal and external conductors of cables to release static before making connections. It is reported here and discussed in subsequent posts that manual calibration on either V DAC or I DAC is broken. It is recommended to avoid manual calibration in 01.11. Manual calibration was reported to work successfully in 01.08. Update: Manual calibration seems fixed in 01.13. See Calibration section below.Series and Parallel connections: Rigol outline correct connections between terminals for series (higher voltage) or parallel (higher current) operation. See attached PDF "DP800 Outputs in Series and Parallel.pdf".
Great Deal 
New Comment