Zinsser ZINBIN500 500 ml B.I.N Primer/Sealer Stain Killer Paint

Product Information

Bulls Eye® 1-2-3 contains a biocide that protects the dried coating against fungal degradation, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to fungal degradation on the underside and surface of the primer film, prolonging the life of your paint job. Coverage - 12.5 m2 per litre. Coverage may vary depending upon method of application and surface porosity. H225 Highly flammable liquid and vapourH317 May cause an allergic skin reaction.H318 Causes serious eye damage. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood.

Drying Time - At normal temperatures B-I-N will dry to touch in 15 minutes and can be recoated in 45 minutes. Paint spot-primed exterior surfaces after they dry. Lower temperatures, higher humidity, and the addition of tint will prolong dry and cure time of the product.Remove Zinsser® B-I-N® and most types of dried on paint from brushes with ease using Zinsser® B-I-N® Brush Cleaner & Restorer. More effective than traditional mineral cleaners such as White Spirit, this product contains powerful detergents that break down paint for an ultra clean finish. No overnight soaking is required, simply soak brushes in a suitable container for up to 4 hours. Slightly cloudy liquid, may separate slightly hence must be shaken thoroughly before use. Bulls Eye® 1-2-3 is rust inhibitive and ideal for new metal. It resists flash rusting in its "wet" state - and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters - any interior or exterior metal surface. When the paint is removed rinse the brush thoroughly several times under warm (not hot) running water. B-I-N® works brilliantly on water stains, fungal degradation, nicotine, oil stains, marker pens stains and more.

B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on inte ..MORE rior surfaces and spot priming of exterior surfaces. Place the brush into a clean empty container then add Brush Cleaner and Restorer to cover the bristles (and metal ferrule if required). B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. H222 Extremely flammable aerosol.H229 Pressurised container: may burst if heated.H318 Causes serious eye damage.H317 May cause an allergic skin reaction.H336 May cause drowsiness or dizziness. B-I-NÂ is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces.Remove excess paint residues when possible and re-immerse into Brush Cleaner and Restorer if necessary. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. LESS With an ultra-low odour and innovative water-based formula, B-I-N® AQUA contains only trace elements of VOCs (<0.1%) while providing easy soap and water clean-up.