Joined in 2023 
82 
63 About this deal
Keep stirring the product throughout the process to prevent the formation of patches. Leave the first coat to dry before adding another coat if needed. For a sparkling effect, it may also be necessary to buff the wall when the paint is dry. This step enhances the effect of all glitter products, but it does take more time.
That being said, we found the manufacturer’s instructions useful. Applying the product in a criss-cross motion reduces any patches, and the glitter gathered in certain areas is also easy to disburse by pressing it hard with the roller or brush. Glitter glaze is a clear paint containing glitter crystals. The glaze is intended to be used on pre-painted walls and it usually provides a more sparkly finish than glitter additives. The glitter flakes are designed to mix with matt and silk emulsions but won’t mix well with speciality paints even if water-based. As such, the product is not quite suitable to use in the bathroom or kitchen. Gloss and eggshell paints also don’t mix well with this glitter. Firstly, keep your white walls dusted. Using a soft cloth to cover a broom or a bristle, gently dust your walls to remove a build up of dirt. This will allow your walls to dazzle more brightly, and will also prevent dirt from being smeared around when you clean your walls more thoroughly. Just make sure the surface is clean and seal all surfaces not to be painted with painter’s tape. Don’t forget to protect the floors with a drop cloth.
On walls, the product covers up to 8m²/litre and dries to a durable, shimmering finish. On other surfaces, and especially on fabric, the coverage is considerably lower due to the absorbency of the material. The finish can also suffer alterations on surfaces different than walls.
Once your walls are dusted, create a solution of warm water and a mild detergent, and use a sponge to gently wipe the surfaces. Leave for 5-10 minutes, and then use clean water and a clean sponge to rinse your walls. Avoid using too much liquid, as this can cause water stains. The secret to a successful application of glitter additives or glaze is a vigorous stir of the product before application. Use a smooth roller and apply a thin layer of glitter paint or glaze to the surface with a criss-cross motion. Glitter additives and glitter glazes are designed for the same purpose – to add sparkles to walls and other interior surfaces. The difference is in the way they’re used.Coverage is similar to most wall and ceiling emulsions. The number of coats needed to achieve satisfactory results varies depending on your expectations. If the product is stirred well before and during use, two coats are usually enough to get a sophisticated shimmer.
Water-based and non-toxic, the glaze is suitable to use in poorly ventilated environments or in your children’s room. Application is easy and straightforward; just stir the glaze and apply it with a smooth roller or wide bristles brush, depending on the surface. According to the recommended mix ratio, the product doesn’t turn out much cheaper than the V1rtus. However, most users report that the product still provides satisfactory results when the same quantity is mixed with 1.5L of paint. And in this case, Hemway is more affordable, provided that buffing unleashes the desired sparkling effect. V1rtus is a high-quality glitter paint additive that transforms almost any wall or ceiling emulsion into a sparkling glitter paint. A 100g pouch contains thousands of glitter crystals that enhance either flat, matt, soft-sheen or silk emulsions – allowing you to achieve the look of your dreams. Hemway Silver Holographic Additive is the low-cost alternative to V1rtus, a glitter additive brand belonging to the same manufacturer. The main difference between the products is the price, but also the covering power. In fact, the additive produced under Hemway’s brand has a recommended mix ratio of 100g to 1 litre of paint. Unbuffed, a pouch of additive is suitable for up to 1.5L of paint. However, considering the price of a pouch, we recommend mixing the quantity with 2.5L of paint and buffing the wall with buffing pads to unleash your new sparkling effect.
Halfords Glitter Spray Paint 300ml
White paint is a staple, so a washable version means you don’t have to make any sacrifices when it comes to style. If you have children, the benefits are countless. Crayon marks? Dirty fingerprints? Juice splatters? Fear not – with washable white paint, scuffs and stains can be easily washed off. Polyvine Glitter Glaze may be a DIYer’s dream. Supplied in 500ml tins, the product is ready to use on pre-painted walls, wallpaper, furniture and fabric – and the sparkling effect can easily enhance the look of any home environment or revive old, worn-out objects. Choosing one product over the other is often a matter of preference; we prefer glitter additives because they can be mixed with the paint of your choice and are more cost-effective than glaze.
Recommended for use with water-based wall and ceiling emulsions, this additive is compatible with most interior paints. This makes it ideal to use with wall, wood and metal paints for a host of DIY projects. Coming in 25 colours, the product is very easy to use. Just pour the contents of a pouch into the indicated quantity of paint, stir it vigorously, then apply the emulsion to the wall with a smooth roller. We followed these indications and achieved satisfactory results; however, some users suggest that mixing a small quantity of glitter with a small quantity of paint in the roller tray can enhance the end-results. Glitter additives are supplied as glitter crystals to mix with the emulsion of your choice. Some additives can be mixed in all types of paint, others are compatible only with water-based emulsions, while others are incompatible with speciality paints, even if water-based.
Whether you decide to use glitter additives or glaze, we still recommend painting the surface in the desired colour and finish with one or two coats of glitter paint or glaze. Surface preparation is therefore minimal.
Great Deal 
New Comment