Rust-Oleum Natural Effects Cast Iron 750ml

Product Information

This work can be done with a chemical paint stripper. A hot air gun can be used, but older paint may contain lead. If working with a removable item such as a gate, you could take it to an industrial stripping company. Providing years of protection, Rust-Oleum Gloss covers up to 9m²/litre depending on application method and rate, and porosity of the surface. Ideal for outdoor and indoor use on a variety of materials, the product touch dries in two hours and can be recoated after 16 hours. We also offer a colour match service. Colour identification can be taken from an existing casting or paint swatch.

Unless repairs are required, you can usually restore cast iron through removing paint, sanding and refinishing, but certain items require more thought than others. When deciding how to restore old cast iron, you need to consider the item's value, purpose and finish – is it painted or exposed?

Traditional colours include white and blue. White is a beautiful choice in both urban and rural environments; it has a unique elegance and pairs with all other colours. Blue is ideal to use in a coastal area, inspiring freshness. Covering up to 5m²/litre, the product comes in 250ml tins, although other sizes are also available. With a fast drying time, the product can be re-coated after four hours and is ideal to apply to metal doors and gates, railings, garden furniture, and more.

Another potential problem is the fracturing of cast iron because of impact or casting flaws,' says Kent. A good paint finish is vital to the performance and longevity of a Cast iron rainwater and soil drainage system. Primers and finished coatings protect the underlying substrate by providing a barrier between the cast iron and corroding elements. Cast Iron UK offer the following finishes, all of which are carried out by paint specialists in a controlled paint plant environment. Where the paint is less built up and only lightly flaking, it will be easier to leave it in place and paint over it. As with most renovation jobs, the hard work comes at the beginning, meaning hours spent scraping, sanding and scrubbing,' says Clare.The next step to restore cast iron garden furniture is to give it a good clean. If there is any algae present, then a fungicidal wash or bleach should be applied with a brush or sponge. 'Leave for 24 hours before washing off with water,' says Clare. Our favourite thing about this paint is the low content of volatile organic compounds. The product is safe to use in enclosed and poorly ventilated spaces and it cleans easily from brushes and rollers. Cast iron gates and railings make an important first impression to your home, so if they are looking tired, restoring them will uplift the whole exterior. Apply the primer following the manufacturer’s instructions and cure the surface for at least 24 hours before applying the paint.

Particular caution should be taken when using the product indoors. Volatile organic compounds in the paint can cause irritation or allergies when handled in poorly ventilated spaces. Limit indoor application, use a protective mask and keep windows open during the application process. Full hardness is achieved in one week, and it’s recommended to handle painted items with care during this time. Results might not be satisfactory if the product is applied in damp conditions or temperatures below 10°C. Whether you have a tired cast iron fireplace in situ, or are planning to fit an antique design, it will likely need some restoration work. Preparing the surface is key to achieving satisfactory results. For a good paint grip, the surface has to be cleaned and degreased. Remove all stains, old flaking paint, grease, oil, and rust from the surface. This is important even when the product claims to do the job when painted onto rust. Cast iron can be difficult and uneconomic to repair, so if a decorative section is completely missing, there is little hope of repairing it. A proficient welder could, however, restore a detached section or a concealed structural element,’ says Allum.It’s been a peculiar summer, without a doubt, but the nights are once again drawing in. This being the UK, that means that sooner or later temperatures are sure to start dropping like nobody’s business, and it may well be time to start thinking about cranking up the heating. If you’re someone who owns the delightful winter heating solution of a wood-burning stove, now is also the time when you start to prepare for a winter of getting the most out of your stove.

The only downside of this method is waste. A sprayer takes up a lot of paint, so make sure to account for this when choosing the quantity. Apart from this, the process is straightforward. Fill the reservoir with paint, put on protective equipment and spray paint the objects from 10-15cm of distance.

Special Surfaces / Heat

The two main functions of a primer are to provide short term protection and provide a surface to which a subsequent top coat or finish coat can adhere to. The primer paints used are RAL 7024 dark grey in colour and have been specially formulated to create a barrier to corrosion. The primer can be over coated with epoxy, polyurethane or acrylic paints. If you are restoring a fireplace that has damaged or flaking paintwork, then this will need to be removed with paint stripper. This is unpleasant work, and you need to be extremely careful when working with such harsh chemicals. Do not use a blowtorch, as you could release lead from the paint or damage the fireplace. This highly heat-resistant spray paint from Plasti-kote offers a lovely, smooth satin sheen with high levels of durability. This high level of durability is also actively resistant to fading, to help preserve the life and looks of your wood burning stove for even longer. As well as preserving the life of the metal it’s also highly abrasion resistant to prevent rubbing and scratching. Kent advises that the best way to repair cast iron is through cold stitching. 'Specialist firms can take moulds from cleaned originals and recast components.' This works particularly well for items with repeat sections, such as railings or balustrades.