Motion Sensor Indoor Lighting PIR Occupancy Sensor Switch 200w Wall mounting auto on/Off Lights, Presence Detection

Product Information

Simple things like air blowing in close proximity or a rodent moving across the floor can still set off your alarm. The housing will usually have a plastic "window" through which the infrared energy can enter. Despite often being only translucent to visible light, infrared energy is able to reach the sensor through the window because the plastic used is transparent to infrared radiation. The plastic window reduces the chance of foreign objects (dust, insects, rain, etc.) from obscuring the sensor's field of view, damaging the mechanism, and/or causing false alarms. The window may be used as a filter, to limit the wavelengths to 8-14 micrometres, which is closest to the infrared radiation emitted by humans. It may also serve as a focusing mechanism; see below. Time-delay is added continually: when it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time). time-delay adjustment: it can be set according to the consumer’s desire. the minimum time is 10sec±3sec. the maximum is 7min±2min. Infrared motion sensors are typically straightforward to install. Before installation, however, it is important to familiarise yourself with the particular sensor's range. This will help you to plan an effective coverage system and ensure the entire area that needs covering will be monitored. PIRs come in many configurations for a wide variety of applications. The most common models have numerous Fresnel lenses or mirror segments, an effective range of about 10 meters (30 feet), and a field of view less than 180°. Models with wider fields of view, including 360°, are available, typically designed to mount on a ceiling. Some larger PIRs are made with single segment mirrors and can sense changes in infrared energy over 30 meters (100 feet) from the PIR. There are also PIRs designed with reversible orientation mirrors which allow either broad coverage (110° wide) or very narrow "curtain" coverage, or with individually selectable segments to "shape" the coverage.

The qwyeuro advantage:high-quality switches specially designed for the home, the lights come on when people come, and the lights go off when people walk off, reducing energy wasteTime-delay is sens adjustable: it can be adjusted according to using location; low sensitivity with 2m for detection distance; high sensitivity with 12m, it fits for large room.continually: when it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).

Can identify day and night: the consumer can adjust work ambient light. it can work in the daytime and at night when it is adjusted on the “sun” position (max). it can work in the ambient light less than 10lux when it is adjusted on the “moon” position (min). as for the adjustment pattern, please refer to the testing pattern. They are referred to as “passive” due to the fact that no heat or energy is emitted by the sensor itself. It is also important to remember that PIR sensors detect the emission of infrared radiation, and not heat. How do PIR Sensors Work? The PIR sensor is typically mounted on a printed circuit board containing the necessary electronics required to interpret the signals from the sensor itself. The complete assembly is usually contained within a housing, mounted in a location where the sensor can cover the area to be monitored. Radiation is produced by all objects that have a temperature greater than absolute zero. This energy is expressed in the form of heat energy. Because heat radiates as infrared wavelengths, much of this radiation is not visible to the human eye, however it can be detected by electronic instruments that have been specifically constructed for this purpose.

All objects with a temperature above absolute zero emit heat energy in the form of electromagnetic radiation. Usually this radiation isn't visible to the human eye because it radiates at infrared wavelengths, but it can be detected by electronic devices designed for such a purpose. The plastic window covering may have multiple facets molded into it, to focus the infrared energy onto the sensor. Each individual facet is a Fresnel lens. PIR (passive infrared) sensors utilise the detection of infrared that is radiated from all objects that emit heat. This type of emission is not visible to the human eye, but sensors that operate using infrared wavelengths can detect such activity. They are sometimes referred to as ‘motion-based detectors’, as they sense the presence of people, animals and objects through the movement of their infrared wavelengths. Motion detector with superimposed beam pattern. The length of the beams is a measure of the detectors sensitivity in that direction. Many false alarms will be caused by the placement of the alarm and sensors rather than the cost or quality of the alarm. This means that when installing wireless motion detector alarms, you should arrange them in places that maximise their efficiency while minimising false warnings.

One of the most successful to date is the PIR sensor method found in many of the burglar alarm systems installed in domestic and commercial properties alike. But what is a PIR Sensor? And what makes them so effective? What is a PIR Sensor? Avoid installing sensors near radiators and air vents, for example, as temperature changes could impact reliability or result in a false alarm A PIR-based motion detector is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically activated lighting systems. item specification -- distance: 2~12 meters (adjustable); detection angle: ≤160°; time-delay: 5sec~10min(adjustable); recommended installation height: 1.5~4m. wire connection instruction: brown wire: live input, red wire: live output, blue wire: common neutral.motion sensor outdoor -- the pir sensor adopts infrared body motion induction technology, which can achieve intelligent control and energy saving. recommended that the product is installed by professional electrician. It is also recommended that the PIR not be placed in such a position that an HVAC vent would blow hot or cold air onto the surface of the plastic which covers the housing's window. Although air has very low emissivity (emits very small amounts of infrared energy), the air blowing on the plastic window cover could change the plastic's temperature enough to trigger a false alarm. A passive infrared sensor detects the infrared light emitted by a warm object using passive infrared technology. PIR-based motion detector edit A PIR motion detector used to control an outdoor, automatic light. A camera trap with PIR motion detector. An indoor light switch equipped with PIR-based occupancy sensor [1]