276°
Posted 20 hours ago

OSMO 3044 750ml Polyx Oil Natural Transparent - Raw

£26.14£52.28Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

A. In short, 'No'. Oiled and waxed finishes on floors are 'Micro-porous' which means that although the wood is protected, it can still breath as it is not completely sealed as it would be with a varnish. The ideal application tool is a firm, fine, natural bristled brush. For the best results, apply thinly and remove any excess oil from the surface of the wood with a clean, lint-free cloth. Occasional Maintenance: If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Spray cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.

It’s always a great idea to start with the best canvas possible, sand your wood through the grits upto P120, this is a fine sand on bare timber in preparation for finishing not suitable for removing varnish or paint. Always sand with the grain of Buffing is not really something that helps with these oils, they dry hard and although they do contain some waxes or resins they do not increase much in shine when you buff them. The oil is inside the wood and so there is little for light to bounce off unlike wax that remains on the surface of the wood and is much more reflective. Wood first treated with Osmo Wood Protector 4006 may appear a little more dark. Always trial apply Osmo Polyx®-Oil 3044 Raw over the Wood Protector to ensure the final appearance meets with expectations. Osmo Polyx Oil Raw 3044. This will lessen the wet look on lighter timbers such as Oak or Pine. Raw gets mixed results on hardwoods especially darker hardwoods as it contains white pigment. If you are looking to change the colour of your wood then you can go across to the Please Note: Osmo Polyx Oil, as with any other clear wood oil will enhance the grain and character of the wood by giving it a damp like appearance. To test how the wood will look once the oil has been applied, slightly dampen the wood using a clean sponge or cloth. Never saturate wooden surfaces with water. Once dampened, the wood must be allowed to fully dry before applying the oil.Hi I’m Jay from Wood Finishes Direct, In this video I’m going to be highlighting the key things you should consider before starting your project with the Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care 8016 concentrate to mop water and clean the surface with a damp mop. To refresh and clean intensively or for stubborn stains, use Osmo Liquid Wax Cleaner but ensuring you are applying a very thin coat. A. Probably not because the small content of white pigment in this product tends to collect in the grooves and other rough areas of the wood to show through more. Osmo Polyx-Oil 3051 Raw is designed to retain an untreated appearance on light coloured woods such as Oak, Ash, Birch and Maple. Neutralises the permanent ‘wet-look’ that develops after the application of a clear oil-based finish and keeps the wood looking raw and untreated. One of the key benefits of Polyx-Oil Effect is its exceptional durability. It is scratch and scuff resistant, making it perfect for high traffic areas in your home. It is also water and dirt repellent, making it easy to clean and maintain.

Ex. For Natural (no colour change from raw wood) tint Polyx-Oil with Wood Wax Finish 3111 White at 3% for the base-coat, followed by a coat of clear (untinted) Polyx-Oil as a top-coat. There is a couple of downsides to choosing Osmo oil on an exterior over other products. The first, you need to give your timber extra coats of oil!! The more protection you can give external timber the better, so bare timber should get at least 3, maybe even 4 coats of Osmo oil. The second is your timber is going to need topping up with Osmo every year or 2 or it won’t last. One plus point is Osmo UV-Protection oil remains microporous, meaning you can apply additional coats further down the line without the need to sand. LIMITED OFFER: Free Osmo Soft Tip Brush 25mm when purchasing a 750ml size tin of Osmo Raw, or a half price Osmo Floor Brush 400mm when purchasing 2.5ll. Simply add the products to your basket to qualify, the relevant discount will be automatically applied. For dark and extractive-rich hardwoods (e.g. Wenge, Walnut, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. Osmo Polyx Oil Tints which come in a range of colours. The whole Polyx Oil range comes in handy 5ml sachets to do your test areas before purchasing a bigger tin.

Filters

Osmo Interior Polyx Oil Effect Raw - 3044 is a lightly white pigmented wood oil designed for using on wooden flooring and furniture. Osmo Polyx-Oil Effect is the ultimate choice for protecting and enhancing your wood surfaces. This high-quality finish is made from natural plant-based oils and waxes, making it environmentally friendly and safe to use. The alternative will be to take a look at some of the coloured oils that will colour and protect like the Polyx you have already used. Bear in mind that when oils soak into a wood they will naturally highlight the tones of the wood and so for Pine this can be oranges or pinks, and this can happen even if the oil is pigmented. So again those test areas are vital.

The oil will reach full hardness after around 10 days to 2 weeks, time frame can depend on temperatures, and good air circulation will speed this up. If you want the best for your wood surfaces, choose Osmo Polyx-Oil Effect. Its long-lasting protection and beautiful finish will exceed your expectations. I live in a Victorian seaside town with a lot of old houses. One of the services I offer as a professional decorator is the renovation of old floorboards. Now old floorboards were never meant to be on show when installed and they’re often very beaten up. I quite like that though as it just adds to the character. Osmo Polyx-Oil is my product of choice for coating the floorboards up for a few reasons. The rich, deep, subtle finish has the perfect affect to suit any older house or farm cottage. The finished product seems to last for years and years. Multi-purpose cleaners such as washing up liquids and detergents can be highly detrimental to the finished surface.

Also Recommended

Always shake the can well before use. Failure to mix the white colour (within Osmo Door-Oil 3033 Raw) and all ingredients could lead to an increased patchiness.

For Cork surfaces, due to their high absorbency please ensure that the wood finish is applied thinly. Longer drying times are to be taken into consideration (at least 24 hours). Let me show you a very simple test called the water test.All you need is a drop of water, apply a drop to the wood and leave for 30 seconds, easy right? If the water beads then you know there is an existing finish on there. If the water sinks in this would indicate that there is an untreated surface so you can move straight on to application. They offered me a replacement bottle, but they were not at all interested in helping me sort out the damage already done. They told me to sand it off by hand. I did try, but it was a large sheet of wood and it would be a difficult task under normal circumstances. I happened to be 8.5 months pregnant and couldn’t risk it. I ended up paying for a simple machine and finishing the job myself when, by law, I could have billed them for a new table or for a professional carpenter.Thank you for getting in touch. Its difficult to give a definitive answer to that without a little more information. My first thoughts would be that Polyx oil is likely to be fine for your table, however it can depend on the wood type, the preparation carried out and how the product was applied. Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining. Based on natural plant oils and waxes (sunflower oil, soya oil, thistle oil, carnauba wax and candelilla wax), paraffin, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free)

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment