RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

Product Information

Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. If possible, and if the wood is absorbent please apply the first coat to all sides before installation.

Coverage: 1 coat up to 8 sq metres/litre of smooth timber and up to 5 sq metres on rough sawn timber, 2 coats recommended. Balau: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations

Also Recommended

Rosewood: 4-6 weeks exposure. However, Natural Oil Woodstain 727 Rosewood is optically suitable and requires a weathering period of approx. 12 weeks before use of Natural Oil Woodstain. Contains Fatty acids, C6-19-branched, cobalt(2+) salts, 1,2-benzisothiazol-3(2H)one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2Hisothiazol-3-one (3:1). May produce an allergic reaction. For the following wood types, a weathering period is recommended. Depending on wood species, new or freshly sanded wood requires up to 12 weeks (approximate) exposure to the exterior elements before application. P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.

If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading. Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Colours: The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.For the best protection, apply an exterior wood preservative to protect against mould, algae, dry rot, woodworm and wood related diseases Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. Fatty Acid Cobalt Salt. Hydrocarbons, C10-C13, nalkanes, isoalkanes, cyclics, 2% aromatics. 1,2-Benzisothiazolone. reaction mass of: 5-chloro2-methyl-4-isothiazolin3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol3-one [EC no. 220-239-6] (3:1). Ipe: 6-8 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.

Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces. Bangkirai: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.

Top 5 Coloured Decking Oils to Stain Decking

After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply!