276°
Posted 20 hours ago

Zinsser ZINBIN400A 400 ml B.I.N Primer/Sealer Stain Killer Aerosol

£3.995£7.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

For maximum protection from the natural inhibitors, the Rustins manufacturers ensured that this product has excellent sealing properties. Thus, it also works best as a wood sealer, which sands easily. Besides, it has a low odor, thereby not harmful to your respiratory system. What’s more is that you will complete most of your work on time, as this primer covers approximately 12m Just in case you think I’m making it up about not sanding, Rustoleum’s technical data sheet on this stuff says, “excellent adhesion to glossy surfaces without scuff sanding”! If you’re applying the second caulk directly on top of the previous caulk, make sure you clean the old caulk with a little denatured alcohol first to remove any oil.

If you're not sure whether existing paint is oil-based or latex, saturate a rag with alcohol or fingernail polish remover and wipe a small section of the area. If the paint is latex, you should have a bit of paint on the rag after you've wiped. If the paint is oil-based, it won't be affected. Since silicone caulk only comes in clear or white, and can’t easily be painted, trying to hide it becomes a frustrating endeavor. Hold the spray primer 2-3 inches from the silicone caulk. Open the nozzle cap, point it to the caulk and start shooting primer over it. Work until you completely cover the caulk.ItemImage": "//sherwin.scene7.com/is/image/sw/paint_template-1?layer=comp&wid=250&fmt=jpeg&qlt=92%2c0&op_sharpen=0&resMode=sharp2&op_usm=0.0%2c0.0%2c0%2c0&iccEmbed=0&printRes=150&_tparam_layer_1_src=sw/651049629_White_Pigmented_Shellac_Primer_White_1G", Also, if this paintable caulk is silicon caulk, consider taking the extra precaution of adding a shellac primer spray first. Doors, drawer fronts and all hardware should also be removed before priming. If you are going to fill any holes from hardware, or patch any dings or scrapes, that should also be done prior to priming and then sanded smooth. Spraying versus rolling Zinsser BIN Primer Sealer seals surface pores so you use less finish paint. Finish coat has rich uniform appearance, with no "high" and "low" spots. Finish resists dirt better and has better scrubbability. Painting cabinets is not hard but it is a LOT. There is a lot to paint, and a lot of steps, and if you are going through the trouble of painting cabinets you want to make sure you do it right the first time.

This may seem like an ad for BIN shellac-based primer but I promise you it’s not, I just really love the stuff and I use it for almost everything! I always have a can of it in my stash! Top mistakes to avoid when priming or painting your cabinets: If you successfully loosen all existing silicone caulk, then you’re ready to apply the new paintable silicone caulk. Use a Caulking GunBut just to ensure it’s fully cured, I’d recommend waiting 30 to 45 minutes before starting to paint. Step 3: Apply paint over the dried primer spray. When we customized the existing bathroom vanity in my kid’s bath, we added a panel to the side of the vanity and used a raw sheet of MDF for that. We also built some basic flat-front drawers out of raw MDF. I needed to paint it the same colour as the rest of the cabinet doors (Benjamin Moore Mink Violet). To prepare those surfaces for paint, I also use Shellac or oil-based primer.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment