Line 6 Helix LT Guitar Processor

Product Information

Wobble—Models how evenly the rotating speaker and its ballast weight are balanced about the axis. At zero, the speaker and ballast are perfectly balanced, and as the wobble control is increased the rotation of the speakers becomes more eccentric.

High Cut— Applies a high cut (or low pass) filter to the reverb, letting you remove the effected signal above a certain frequencyRndm Trigger—New harmonics are selected randomly every time the Retrigger parameter is set to "Trigger." See the Retrigger parameter below. FS1/2/3 emulation MIDI messages can now be momentary for HX Stomp (values 64-127 = press; values 0-63 = release) If you’re after something that’s easy to get up-and-running with but not particularly interested in having the most lifelike amp sounds on the planet, then the Helix is the obvious choice. If amps matter to you more than effects, then go with the HeadRush, but remember that in both cases third-party IRs can be loaded to completely change the character of the amps. In some cases, Command Center > HX Looper commands would not function while in Preset Spillover mode— FIXED When editing parameters, the Helix LT is a clear winner: the six parameter knobs underneath the main screen mean you have more at your fingertips, which speeds up the process of editing or creating sounds.

The specific pieces of personal information we collected about you (also called a data portability request).

HX Effects

Low Cut— Applies a low cut (or high pass) filter to the slices, letting you remove the effected signal below a certain frequency Master—This is the master volume on the front panel of the amp. It is located between the preamp and power amp and can be used to get more or less power amp distortion. This amp is VERY loud, and most players would probably run the master volume on the lower side. If the master volume is cranked, the power amp distortion can be pushed into unpleasant territory. Most players would never crank the master in real life as the actual output would be way too loud for most musical settings. HX Stomp, HX Stomp XL only—Stomp mode footswitches would not follow the Global Settings > Displays > LED Ring Brightness value — FIXED

Voltage—The Nobels ODR-1 can behave differently depending on how much power it receives. Choose 9V or 18V, which gives a bit more headroom. HX One only: When using stereo inputs, in certain cases, the right channel would be offset by up to 6dB— FIXED The Personal Information YGG has reached the defined retention period no longer needs the personal information for the purposes of the processing, but you require the Personal Information to establish, exercise, or defend legal claims. Key features: Effects modelling, amp modelling, recording interface, expression pedal, scribble strip displays, 7” touchscreen Low Cut— Applies a low cut (high pass) filter to the speakers, letting you remove the effected signal below a certain frequencyAmp/Preamp > Line 6 Kinetic, Line 6 Original where all the preamp stages clip at roughly the same time, allowing the amp to go from mostly clean to heavily distorted using the guitar's volume control.

To make the model more versatile, we made this effect to behave more as a stereo effect rather than modeling the whole cabinet, and suggest using the effect in combination with a cabinet model if recording direct or listening through FRFR systems." We do not charge a fee to process or respond to your verifiable consumer request unless it is excessive, repetitive, or manifestly unfounded. If we determine that the request warrants a fee, we will tell you why we made that decision and provide you with a cost estimate before completing your request. Step Time—Sets the time between steps. The total delay time is Time x Steps, so [Time: 1/16 x Steps: 8] is a 1/2-note. P ress the knob to toggle between ms/sec and note values To exercise the access, data portability, and deletion rights described above, please submit a verifiable consumer request to us by either: Overall, worth the money and if you don't need all the extra inputs and outputs as in the full model this unit can do everything you want. Scribble strips ??? Nice indeed, but I don't miss them and the LT has a wonderful (maybe even better) system for that.HX Stomp/HX Stomp XL only—Renamed snapshots would not appear in HX Edit's Command Center window— FIXED