Heat Transfer Vinyl - 12In x 8Ft White HTV Vinyl Roll,White Iron on Vinyl Roll for Cricut & Cameo - Easy to Cut & Weed for Heat Vinyl Design(White)

Product Information

For the white iron-on vinyl layer, prepare a green StandardGrip machine mat with the white HTV, shiny side down, and secure it with a brayer. Once the iron on vinyl has been properly applied it is ready for wearing, using, and laundering. Allow the adhesive to cure for at least 24 hours before washing. Once it has cured, it can be washed and dried. For best results, wash inside out with cold water and hang to dry or tumble dry on low.

Use the Layers Panel to make sure you have the Offset layer selected and change the Operation to "Basic Cut." The shape will automatically change to gray, which is fine. This will be my clear HTV layer. Use the Layers Panel to make sure you have the new layer selected and change the Operation to "Basic Cut." The shape will automatically change to gray, which is fine. The steps for creating and applying a design using Heat Transfer Vinyl onto a garment are as follows: The first step in removing the sublimated design is to let the HTV cool down. It’s important to let the HTV cool down completely to avoid any damage to the design or the HTV itself. After cooling, the next step is to carefully peel off the transfer paper from the HTV. It’s important to peel the paper off slowly to avoid any damage to the design or the HTV. Cleaning the Heat Press and Work Area There are methods like printable heat-transfer vinyl that only require an inkjet printer, but I often find that the image will fade sooner than hoped for. I’ve tried Easy Subli too, which gives good results — but is kind of time-consuming, with lots of extra steps. Sublimation spray is fine in a pinch, but in my experience the image will fade the first time you wash the shirt.

Printing and Sublimating on White HTV

Why do these work when regular permanent vinyl doesn’t? Because these specialty vinyls have a polymer coating on them, which can be sublimated! But what if you don’t want to use glitter, holographic, or glow-in-the-dark vinyl, or printable vinyl? By following these steps to prepare the white HTV for sublimation, you can help to ensure a smooth and successful transfer process. With a little bit of care and attention to detail, you can achieve high-quality, professional-looking results that are sure to impress.

We also sell the Stahls HTV Colour Card which contains printed samples of each colour/finish available in the main Stahls HTV products. What Are The Differences In Different Brands of CAD-Cut Materials? Then, load the mat with your printed sheet into the machine and press the flashing button to cut your design. To follow this tutorial using cotton T-Shirts and clear sublimation HTV, you’ll need regular white HTV if you’re making a color shirt, as well as some standard sublimation supplies like a sublimation printer (I’ll use my converted Epson Eco-Tank), a heat press (like a Cricut EasyPress 2, or another style), sublimation transfer paper, and other items you can find in my materials list. Follow my list so you can make sure to get the right products. I used different shades of grey for each of my white sublimation shirts but you can use any light-colored high polyester count shirt to make this same type of project. Do I have to use white HTV?

Project Notes:

Next, trim away the excess clear HTV and "weed" the design by removing the excess vinyl around the outside edges of the solid design shape. MagiCut® HTV makes short run production easy and profitable with the advantage of removing traditional screen and set-up costs. As a result make good profits from minimal investment. 123 Flex MagiCut Heat Transfer Vinyl Related: A Guide To Food Safe Paint: Definition, Regulations, Types, And Benefits Fading or Blurry Design